This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Buena respuesta del sector al ‘Technical Open House’ de Delteco

They exposed machines of Doosan, Quaser, Hermle and Sodick

Good answer of the sector to the ‘Technical Open House' of Delteco

21/11/2013

The past days 14 and 15 November Delteco celebrated a ‘Technical Open House' in which they participated numerous customers and providers, those who showed a lot interest by the exposed machines, a selection of the wide offer of this company distributor of machines-tool. In addition to the machines in operation, the assistants had the opportunity to assist to diverse technical seminars.

Numerous customers attended to the ‘Technical Open House' of Delteco.

The central installations of Delteco, situated in the Gipuzkoan place of Eibar, registered the visit of numerous professional of the surroundings of the mechanised, from the most diverse sectors and geographic areas. The exhibition of numerous machines of the offer of Delteco, many of them with demonstrations in direct, attracted the attention of a skilled public that could witness the technicians of mechanised advanced of marks like Doosan, Quaser, Hermle or Sodick, in addition to cutting cutting shears, folding machines and mechanical presseses of other marks commercialised by Delteco.

The interested also could see milling machines of CNC reconverted and a wide assortment of machines of occasion of the division of occasion of this supplier of machines-tool.

Likewise, the exhibition had the presence of some companies collaborators, as Open Mind, Emuge Franken, Schunk, Sumec or Haimer.

A good opportunity for technical conversations on foot of machine.

Doosan, main leading

Doosan, a machine represented by Delteco from January 2013.

During the event, the machines of Doosan had a special leadership. It treats precisely of the most notable news of Delteco in the year 2013 in relation with the machines that commercialises. From January of this Group Delteco, one of the main providers of machine-tool of the Iberian Peninsula, works like exclusive distributor and official technical service of Doosan in this territory. By means of this agreement with the Korean company, Delteco reinforced his position in the national market, where is selling successfully machines of the known mark like lathing centres (machines multifunción, horizontal and vertical lathes), machining centres (vertical and horizontals) and boring mills.

More in concrete, could see in the headquarters of Delteco the following machines of Doosan:

Lathe Doosan Cougar 2600M (control Fanuc 0iT): Length of turning 760 mm, maximum diameter of turning 376 mm and cabezal of 3.500 rpm.
Lathe Doosan Cougar V400 (control Fanuc 0iT): Length of turning 461 mm, maximum diameter of turning 496 mm and cabezal of 3.000 rpm.
Lathe Doosan Cougar 700 LM (control Fanuc 32iA): Length of turning of 3.200 mm, maximum diameter of turning 900 mm and cabezal of 1.500 rpm.
Centre of mechanised vertical Doosan DNM 650 (control Fanuc 0iM): Table 1.300 x 670 mm. Routes: 1.270 x 670 x 625 mm and speed of the husillo main of 12.000 rpm.
Centre of mechanised vertical Doosan VC 510 (control Fanuc 0iMD). Table (2) of 860 x 570 mm. And routes of 762 x 516 x 570 mm. The speed of the husillo main is of 12.000 rpm
Centre of taladrado Doosan DT 360 D (control Fanuc i). Table (2) of 650x375 mm and routes of 520 x 400 x 350 mm. The speed of the husillo main is of 12.000 rpm
Centre of mechanised vertical Doosan VM 960L (control Fanuc 31iA) with table of 2600x950 mm, visited of 2400x960x800 mm and speed of the husillo main of 6.000 rpm.
Centre of mechanised vertical Doosan MYNX 7500/50 (control Fanuc 0i). Table 1.600 x 750 mm. Routes: 1.525 x 762 x 625 mm and speed of the husillo main of 6.000 rpm.

Machines Quaser

Centre of mechanised Quaser MV-204CV with control Heidenhain iTNC 530, during the days.

Also attracted the attention of the visitors the machines of Quaser, of which could see the following:

Centre of mechanised Quaser MF 400C (5 Axles) (control Fanuc 0iM) with characteristics like table of 320 mm of diameter, visited of 410 x 610 x 510 mm and maximum speed of the husillo main of 15.000 rpm.
Centre of mechanised model MV-184P/12 (control Heidenhain iTNC 530), with table of 1.200 x 600 mm presents visited of 1.020 x 610 x 610 mm and maximum speed of the husillo main of 12.000 rpm.

By his part, the model MV-204CV (control Heidenhain iTNC 530) has a table of 1.400 x 700 mm, visited of 1.270 x 700 x 610 mm and maximum speed of the husillo main of 12.000 rpm.

Other machines

Machine of spark-erosion by thread Sodick AQ 600L (CNC LN2W) with 5 axles controlled.

In addition to the quoted machines-tool of Doosan and of Quaser exposed others of the range of Delteco:

Lathe Fat-Haco Tur 800MNx3000 (control Siemens Sinumerik 810D Manual Turn). Length of turning 3.000 mm. Volteo On bancada 800 mm. Volteo On car 500 mm / cabezal 1.800 rpm.
Centre of mechanised vertical (5 simultaneous axles) Hermle C 400 basic (control Heidenhain iTNC 530). Table 1.070 x 700 mm. Routes: 850 x 700 x 500 mm and maximum speed of the husillo main of 15.000 rpm.
Spark-erosion by thread Sodick AQ 600L (CNC LN2W) 5 axles controlled. Axles X-And: 600 x 400mm / Axles Or-V: 80 x 80mm / Axis Z: 300 / Cap. Tank: 875 l / máx. Size piece submerged: 790 x 550 x 250 mm.

Like sample of the machines Fat-Haco showed this lathe Tur 800MNx3000 with control Siemens Sinumerik 810D Manual Turn.

Technical seminars

Delteco Completed the exhibition of the machines with diverse technical seminars of the companies that collaborated in the ‘Technical Open House'. The professionals could attend conferences like the following: