GS Tècnic No lacking to the K of the hand of Industrial Frigo and SB plastic Machinery

Industrial Frigo, one of the providers of GS Tècnic, presebte the equipment of refrigeration of water of the series 'GRA': units monobloque, condensed by air, realizar in version with inner tank or external deposit. They are available in the modular version (C) with possibility of combination with several models also with different power and with projection to future. On the other hand, the equipment of termorrefrigeración of water of the series 'GTW' are units monobloque composed by a section of cooling condensed by water and a section of termorregulación in version monozona or double zone (Dúplex).

In the stand of the K neither are missing the head offices of termorregulación with water of the series TWP-WTP, with maximum temperature of service of +180 °C, projected to condition moulds and cylinders for diverse industrial processes in particular in the sector of the plastics, of the casting to pressesure and of the smelting. The series TW-WTA, with maximum temperature of service of +95 °C have been projected to condition moulds and cylinders for diverse industrial processes between which find the molding of plastic matters and of rubber, the extrusion and in the sector cartotécnico. Finally, also it presents the prototype of Xtreme, a system patented that combines the termorregulación standard with a system hidropneumático (through the system Idropex plus). This system allows to increase the number of Reynolds of the mix and therefore to reduce the time of answer of the channel of the mould; it is indicated by technical moulds where is necessary an enfriamento and a calentamento ultra fast; it allows a decrease of the times cycle until 35%; and a sensitive increase of the productivity.

Team of refrigeration GTW of Industrial Frigo.

The system Moby, presented by SB plastics Machinery, bases in the conjoint action between infrared and empty rays that, regarding the available current technology for the process of dried and deshumidificación, diminishes the maintenance and drop notably the times of dried and of consumption. All the body absorbs a specific wave of infrared rays, and all the water that there is in the plastic matter is absorbed and is possible focalizar the radiation only on the water, with what achieve a maximum deshumidificación of the material. The material heats through the infrared rays directly, of uniform form and controlled, so that when finishing the treatment, achieves the best condition of temperature and material, allowing immediately the beginning of the cycle of work, reducing to zero the rejection to consequence of the deshumidificación.

The vacio to half of cycle, result to be the most efficient for the extraction equipment equipment of liquid, inducing to the extraction equipment equipment no only of the water, if no also of other elements contaminantes, as for example acetal, chloroform, etc. By all these reasons, the system Moby can be employed so much for the deshumidificación, as also for the system of cleaning of the PET, in the process of manufacture of bottles, or in general for the recovery of the recycled plastic.