This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at 'Fuerza para el futuro', el lema de Wittmann Battenfeld en la K 2013

Ver más artículos sobre: K 2013: All the novelties

Hall 16, stand D22 and Hall 10, stand To4

'Strength for the future', the lemma of Wittmann Battenfeld in the K 2013

24/09/2013

From the 16 until 23 October, Wittmann Battenfeld presents the MacroPower bigger that has built up to now. The series MacroPower -for the first time on exhibition with the MacroPower 1000 in the K2010–, have expanded when adding the size 6, the MacroPower 1500. Therefore, the series MacroPower are available now in all the ranges of closing, from 400 until 1.600 t. The significant advantages of the series MacroPower: compact design, high speed and extremely easy to operate and clean

In the machine that exhibits in the K, a MacroPower 1500/8800 with technology ServoPower- the axis of earth will build with PP supplied by Borealis (Austria), using a mould of the Austrian manufacturer of moulds ifw mould tec. The apertures of the 4 tubes of bifurcation are configured with the help of the complex technology of noyos. The noyos are instrumented with valves P/Q. The piece finished desmoldea through a 'noyo intermediate of unemployment' in the opening career. The pieces are extracted and deposited in batteries by a robot Wittmann W853. Thanks to the diagonal distance 1600 x 1250 mm between the columns of the closing of the MacroPower 1500, the mould with his 4 noyos can be mounted of optimum way in the machine.

MacroPower 1500, in combination with mould supplied by 'ifw mould tec'.

In the application showed, the durability of the product is of great importance to practical use. The cycle of life of the product, of more than 50 years, will allow that the team survive under earth without deforming or crack. Has to loan special attention to the optimum fusion of the processing to avoid possible defects. This is the reason whereby the standard heights of quality and confidence, in particular, are decisive criteria for the manufacture of the terrestrial axis, in addition to an efficient production and of low cost. The MacroPower 1500 instrumented with the axis of 'ifw Mould tec' is ideal for the production of this demanding application.

New line of products Wittmann under the lemma 'Power for the future'

Once again, the only style of Wittmann presents in shape of new equipment and innovations for all the areas of the plastic transformers: robots and systems of automation, atemperadores, mills, dehumidifiers, feeders and dosificadores. The Austrian company has developed and set up the robot W842, in reply to the needs of the inyectadores, to offer a greater capacity of load and versatility around the machines of moldeo middle-sized until 800 tonnes of strength of closing and upper. The main technical difference of the new W842 is a zip more pinion for the vertical axis. In this way W842 can manipulate until 25 kg of useful load.

Stands out also the new Drymax Aton2, a back development of the dehumidifier by wheel Wittmann. The precursor model Drymax Aton already had established the point of reference of the industry for the energetic efficiency, but the Drymax Aton2 goes even more there. For example, the thermal sensors power of realimentación through the call 3-Save Process does inmejorable the efficiency, taking only what is necessary of the power regenerated with the end to dry the molecular sieve in the segments of the wheel. Even with this quantity of power, the material dried with air in the process also can heat until one some measure.

All the new range of products of Wittmann.

In transports of materials, Wittmann presents the loaders individual Feedmax, as well as the loaders central of materials Feedmax B. In narrow collaboration with the customers of Wittmann, the loaders of the series B have optimised continuously along the years. Nowadays, they are the devices of reference regarding utilisation and processes of hygiene. For the dosage gravimétrica, the Austrian manufacturer presents his mixers of plastics Gravimax, series 1 and 3, that can be instrumented with different additional functions. The team Gravimax standard also offers an upper performance. For example, all the components of contact with the plastic are of stainless steel. The units also come instrumented with two cells of weighing and a container mezclador highly efficient in which the components mix . This container mezclador is designed to avoid the electrostatic load of the mix.

Robot W842.

Complete the range of products the new models Wittmann of atemperadores thermoregulators of the series C120 Tempro basic, that present dimensions very reduced. The mark offers now a lot of variants of the Tempro basic C120, regarding different pumps and different capacities of warming and cooling. And with the biggest version of this series, the inyectadores also are able to heat the moulds of until 10 tonnes to the temperature of operation wished and in the shortest term.

Finally, do his debut in the K the new flexible mills MC 33. The new functions of the machine, situated at the side of the presses or in a central place and can realizar demanding works in the complete zones of moldeo by injection and moldeo by blown. The construction of resistant steel does of the MC 33 an ideal team for all the recyclings on line of bebederos / coladas, preformas in PET during the start of the moldeo, and many other applications of high power.