Krauss Maffei Increases his inyectoras GX and his offer in extrusion
A year after his launching the series GX already is established in the market by which Krauss Maffei (represented by Coscollola) presents now a greater size of 900 tonnes of strength of closing. With a cycle of 7 seconds and in a machine of two dishes produces during the fair a product for the sector of the packaging. From the K 2013 with the models of size 750 and 900 and with the units of injection 6100 and 8100 expand the possibilities of combination of the series GX until 44 types, in the rank of strengths of closing of 400 to 900 tonnes. Fast cycles and energetic efficiency are two of his characteristics stood out.
In a GX 900-8100 shows during the fair the performance in fast cycles, as they demand sectors like the one of the logistics or the one of the packs and packaging. With a fast application and in a total cycle of 7 seconds, the extraction equipment equipment of the pieces realizar by means of a linear robot and transport to a second robot. Both robots are of the type LRX 250 HS and are instrumented in high version speed. So much the robot like the machine mount the control MC6.
Krauss Maffei Also shows a totally automatic solution for the horizontal change of the mould in the inyectora GX 900-8100. It is an ideal solution for companies in which they require a lot of changes of mould since the transformer benefits of a form to work that almost it could designate just in time.
Extrusion
KraussMaffei Berstorff, by his part, presents variations in his system of fast change of dimension QuickSwitch, that reduces the consumption of power and of material during the change and increases the availability for the transformer. Now it is available for tubes with greater diameters, of 250 to 450 millimetres.
In the zone of extrusion of this company will call the attention also the system IPC of internal refrigeration of the tube, also available for the technology QuickSwitch. This contributes to the transformer a greater capacity to compete because the internal cooling of the tube offers a better efficiency of the costs. Beside the external refrigeration, the tube cools also from inside using the environingingmental air, that succiona by means of a compressesor by a lateral channel that flows in contrary sense to the extrusion. This reduces the space and reduces the consumption of water.
In the fair also can see solutions to answer to the requirement of the market of tubes increasingly complex and with functional layers.
