This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Todas las marcas representadas por Protecnic muestran sus últimas innovaciones en la K

Ver más artículos sobre: K 2013: All the novelties

All the marks represented by Protecnic show his last innovations in the K

19/09/2013

Weima (Hall 9, To59)

Weima Presents the new WLK 800 like part of the new series of trituradores cute-rotors for applications of plastic. The basic model of the rediseñada series WLK (WLK 800, 1000, 1500 and 2000) is instrumented with an electronic engine energetically efficient. These machines trituran all type of plastic, especially hard and resistant materials such as mazacotas, tubes or parts of automotive sector, as well as material blown like bottles of PET or of PE/PP, cubes or tins.

The material feeds in the rediseñada hopper 'pipespacer' (additional space inside the machine allocated to work bulky materials gaps like pipes, IBC's…), which makes possible triturar big parts without moving them of the place. The empujador that commands the material against the rotor is guided by a floor divided. Another of the improvements is the review of the system of against-blades. Now, the against-blades can turn, by what increases the life of the blades.

New triturador cute-rotor WLK 800 of Weima.

MBM (Hall 9, B79)

MBM Maschinenbau Mühldorf, manufacturer of machinery for moldeo by inject-compressesion, desvela in the K the new generation of his line Duplex ICM for the recycling of plastic waste in the next fair K of Düsseldorf. This line dúplex allows that the plastic residue was recycled in an alone process. The substantial changes in the design of the whole of the machine reflect the evolution of the market of plastic waste and products recycled, as well as the purpose to increase the ease of use and the efficiency of the process of production. New software, new system of eyección, access easier to the moulds and an electronic system simplified are some of the improvements. Even the assembling and transport of the machine to the customer has been re-thought to reduce the requests of space and time of setting.

Line Duplex ICM for the recycling of plastic waste of MBM.

Amut (Hall 16, D43)

Amut Shows to his customers and visitors interested a selection of the equipment that better represent to the wide range of machinery that produce. From among them it fits to stand out the model of termoconformado AMP850S-GP, type bent, for productions of glasses of 240cc of PP with an upper production to the 90.000 pieces/h; EA75/52D-HT-HS, the new series of extruder monohusillo of 'high pair- high speed', of diameter 75 mm, ratio L/D 52 (extrusion of tubes): the extruder of double husillo BA92/AR40, of type against-rotante, series 'WPC', for lines of extrusion of profiles of composite wooden and plastic (extrusion WPC); the apilador of horizontal rollers AKO1800 for lines of plate of 1600mm of width (extrusion of plate); and extrusion with cabezal in T for production of plate or ironinging (extrusion of ironinging), with a nominal width of 1200 mm, instrumented with bar estranguladora for pre-adjust the flow of the mass and completed with the corresponding car bear.

Extruder of the series WPC of Amut.

ORP Stampi (Hall 1, C03)

ORP Stampi Goes back to be present in the K to show his more recent innovations related with improvements of technology and systems to adjust to the needs of the customers, reduction of the times of cycle, saving of compound and longevity of the moulds. In the fair exhibit an open mould of inject-compressesion, working road block of cold channels, open system, regulators, fast opening system, unit of control of temperature of the tip of the filter. It shows a complete process of 'before and afterwards' of the mould with a description detailed of all the different stages.

Nordmeccanica (Hall 4, B39)

Nordmeccanica, reference in production of laminators with and without solvent for flexible packaging, does not go to show his machines in the own fair, but has organised a day of open doors in the head office of the manufacturer italianao coinciding with the same dates. “Our customers will have the possibility to visit our factory, where will be able to see the machines of last generation that are at present in advanced state of production, and our laboratory of R&D of 1.000 m², where uses a laminadora complete with different trucks of application for internal tests and demonstrations with customers”, declared the technical director Vincenzo Cerciello.

Laminadora TriplexHorizontal Of Nordmeccanica.

Baruffaldi (Hall 17, C71)

The Italian manufacturer presents the last generation of the machines Povi 5000, in version was line, for the punzonado of the trays. It treats of a solution of investment contained, that allows to obtain a product finished of high quality, by means of the utilisation of utensils of avant-garde that ensure a precise cut. This is possible thanks to a specific software to regulate the step of punzonado and to a system of coining patented, that deletes the rebabas residual.

The company has perfected recently the own technology for the cut to blade of the profiles, with the guillotines of the series TG.G. And in the tubes, with the cortadora orbital TPV-110. Specifically, the systems of hot and cold blade have been complemented with a series of accessories, which confer a remarkable flexibility to the machines, that today are able to cut a wider variety of profiles. In the guillotines of hot blade has entered a form of movement of the blade that allows to cut so many profiles like tubes without deforming or ovalar the product.