Hall 2, stand G24

The skilled company in the manufacture of blocks of feeding, Cloeren, represented in Spain by Sequiplast exposes in the International Fair of the plastic, the K, his model vdehilera Moebius-manifold . At present, there are three versions of this machine: a specific for products 'monocapa, another for the coextrusión and a second coextrusión. All they integrated in the 'Internal Deckle System'.

Model moebius-manifold of Cloeren.

The moebius-manifold is the cabezal more innovative of the signature, at present, slope to receive the patent. This design caters a revolutionary solution that reduces the time of residence and the deflexión by enconchamiento and at the same time increases the window of process. It incorporates an angle of transition variant in the manifold that reduces the area seccional. The manifolds traditional type hanger of clothes or 'coathanger' , increase the deflexión by enconchamiento associated with a superficial area no-uniform in contact with the polymer in the channel of flow. 

The cabezal moebius-­-manifold achieves a decrease in the section in shape of cross of the distributor, characterised by an appearance variant of the ratio. In the [Figure 1] appreciates the initial tear of the section in cross, located in the linear centre of transitions to a smaller section, through the width of the distributor while it keeps a constant length of the distributor by the variant of the transition of the angle of the distributor. The distributor has built with a backline parallel to the lips of the filter to minimise or delete the differential deviation of cover.

The superficial transition of the angle also improves the characteristics of the flow in the final zone of the filter: the reduction of the volume of the distributor joined up with the angle of superficial transition reduces