Hall 9, stand To38

The German company Eschenlohr exhibits at the K fair a complete extrusion line and a rotating system of Extrusion MRS 160 with production capacity of 1,4 t/h. The last K, Multiple Rotary screw of the extruder MRS system, has been established as one of the most important technologies for processing PET without pre-secar. Approximately 40 of these extruders for the production of blades, fibre and applications of re-peletizacion in Europe, Asia, North and South America have been sold. The extremely high desvolatilizacion and high capacity for decontamination of this technology have convinced more and more processors. Thanks to the patented combination of the mono screw with a section of multiple screw technology, MRS extruder is particularly reliable, as well as easy to operate and maintain. All extruder sizes, have been provided from MRS 35 to 35 kg/h up to MRS 200 to 2,000 kg/h, and are producing successfully worldwide in various applications. Not exclusively in PET processing applications, there are also references in processing polyolefins and polyamide

Extrusion line consists of an extruder MRS 130 with rotating Multi, a system of automatic RSFgenius 200 filtration system and an automatic filtration system RSFgenius 250. This line has a tandem of filtration system because it will process up to 1,000 kg / h of flakes of PET bottles for the direct production of continuous filament that requires 25 micron filtration. On the other hand one of the biggest advantages of the MRS extruder is allowing the PET without pre-drying processing but also using a simple system of vacuum water ring pump to process the PET into a high quality product. This is achieved through its unique and patented a mono conventional screw-based processing section, the section of Multiple screw (MRS) is a drum containing eight satellites screws, commanded by a system of transmission gear. Accommodation at satellite screws are separated in the drum approximately 30% and thus allows a great exposure of the molten.

Thanks to this design, gets a desvolatilizacion of, approximately, about fifty times more than in a conventional single screw extruder and this is with a gap of only 25 to 40 mbar. Avoiding the need for a system of high vacuum and pre-drying of PET, the MRS is an extremely economical and effective alternative compared with conventional technologies. On the other hand are arguments in his favor design simple and reliable, spaces reduced to its installation and its high flexibility of use. These are advantages that are appreciated by all more than the actual PET plastics processors. In addition to the excellent ability of desvolatilizacion, the extruder MRS also offers a high result of decontamination. Manufacturers can process, for example, 100% of PET bottle flakes pos consumption, to produce final products for contact with food (FDA LNO). This is achieved without the need for any treatment of the material sooner or later that is processed in the extruder (without any restrictions with reference to the washing process, no pre-drying and no pre-cristalizando, etc.).

The K lounge is an opportunity to present new and enhanced products and services. This is the first time Gneuss will present such a variety of new models of the filter at a fair. All of these new models are the result of an initiative of long-term development. The new fully automatic Rotary filtration systems, proceso-constante and presion-constante RSFgenius and SFXmagnus models offer all the technical advantages of the filtration systems Rotary high-performance with a combination and very economical, and innovative command and self-cleaning concept.

· RSFgenius M is specially designed for material highly contaminated, e.g. for recycling processes, and you can get a greater capacity (25% more compared to the normal series). The innovative command and synchronization system of self-cleaning of filtering RSF Rotary technology genius drastically reduces the loss amount of material in the purge and represents an important optimization of this unique technology of self-cleaning.

· SFXmagnus R offers for the first time, for SFXmagnus series, an integrated self cleaning of the filter elements and at the same time guarantees a continuous process. This Rotary filtration system is designed for applications with a lower level of pollution, among others in the sector of recycling where the drain is important, but where frequent cleaning cycles are not entirely necessary.

Gneuss food industry pressure transducer.

A new system for processing and recycling of PVC is the SFpvc that fits these difficult applications where Gneuss has a traditionally high level of participation in the market. This Rotary filter stands out even by a process perfected to high pollution and a very robust command technology. KR Rotary filter is based on a completely new design, and combines a series of heat exchangers of discontinuous filters with the proven concept of the Rotary filtration technology. Moreover, it is interesting for its compact and robust design.

The company's mechanical engineering, Gneuss Kunststofftechnik offers sensors designed to provide solutions to the problems of its clients. Thus, applications of food plants, regular cleaning of the machinery is completely necessary, sensors are often subject to steam or water jets. Gneuss has developed a special type of sensor for these applications, water-proof, even if your plug is removed. On the other hand, the WPC (wood plastic composite) process requires sensor make it highly resistant. The special technology of membrane of the German company offers a high resistance to the very abrasive material, providing a much longer time of life of operation compared to conventional sensors.