Universal CNC: Takizawa 17-D41 / Takizawa 26-K53 / Okuma & Howa 27 - C20 / Victor 27-E10

Four firms that Universal CNC represents, will be the next EMO exhibition in Hannover. All of them will present their latest products: lathes TT 1500, a lathe multiaxis that combines features of axis and two spindles and dual turret in a compact design for productions in mass and the model TT 1800.

Takizawa will present 3 models of lathes and centres of TNR-200 with two opposing spindles and a turret with axis turning where novelty is the lathe model "And".

Another model is a center of turning model TMM-250 release 3, with two at loggerheads with integrated motors and C axis heads, head fresador in the upper cone KM63 with capacity for 30 tools, motorized lower turret for a maximum of 30 tools and a passage of bar of 75 mm. Finally, a front vise model TT-200 c CM with two front heads, 2 motorized turrets, 2 parts warehouses and a robot for automatic loading/unloading.

Takizawa Taiwan will present 2 new features and that represent a qualitative leap with regard to the technological content of this manufacturer, always advised by its parent company Takizawa Japan machines.

Center of turning former model - 910, a lathe with two heads at loggerheads, with motor integrated, with "C" axis and axis "And". Dishes 10 ". Inverted vertical lathe CNC model YC - 308, vertical lathe of head invested with dish of 8 "and"C"axis with warehouse parts and system of automatic loading/unloading of parts.

Okuma & Howa exhibit 3 machines of which 2 are new features and a vertical lathe, is already a classic for the Japanese automaker. The center of turning and drilling vertical Millac 33T, only occupies only 1 meter in width, has a capacity of turning Ø250x220 mm, a few routes 340 x 300 x 350 mm, BT-40 and intera a warehouse of 16 tools. It is ideal to integrate it with lathes in automated processes. 5-Axis 800VH palletizing horizontal machining center has capacity of machining 5 faces for its Swivel Head of 150 ° of travel. Displacement: x:1020 mm, and: 1020 mm, z:1020 mm, a:150 °, 360 ° C: pallet 800 x 800 mm, BT-50 22 kW of power, 10000 rpm. Also, the vertical lathe of double screw and double turret 2SP-V60: maximum diameter of turning: 610 mm x 660 mm, 30 kW (Op. 45 kW) of power in each head. It has two turrets of 12 positions each.

Victor will expose 6 machines, or they are new, or have any improvement to the already existing models:

• Horizontal lathe VTII-20YCV: maximum diameter of turning: 310 mm, engine integrated with C axis, axis, and motorized tools, 15 kW of power and turret 12 tools.
• Horizontal lathe VTII-26BCV: maximum diameter of turning: 360 mm, engine integrated with C axis, subhusillo, motorized tools, 18.5 kW of power and turret 12 tools. It is a machine exposed robot gantry of automatic loading/unloading and parts warehouse.
• Vertical lathe V300: maximum diameter of turning: 520 mm, 18.5 kW of power and 8 tool turret. Ideal for the machining of brake discs.
• VC-H500HS horizontal machining center: Tours: 720 x 650 x 720 mm, pallet: 500 x 500, 14000 rpm, a warehouse of 60 tools and control Fanuc 18iMB.
• VC-205 mobile column vertical machining center: Tours: 2050 x 550 x 560 mm, 12000 rpm, 11 kW, 2 areas of work, 24 tools store. Control Heidenhain iTNC-530.
• V CenterII-550 vertical machining center: high speed journey on the shaft and 550 mm. Displacement in fast are 42 m/min and acceleration of 0.3G, 0.4G and 0.7G in the X, Y, Z axes respectively. Announces the appointment a Fanuc control 18iMB to HPCC for high-speed machining.