New line of multipurpose milling cutters KSRM
The plaquitas KSRM offer until eight positions indexables to realise the change of plaquita with rapidity and precision. These plaquitas have been designed with an angle of inclination very positive and edges of cutting more resistant to achieve some strengths of cutting lower in the mechanised of titanium.
The plaquitas KSRM are available in sizes of 12 and 16 millimetres for bodies of strawberry KSRM, modular ‘Screw-On', Weldon, as well as for milling cutters KSRM of cylindrical mango. The plaquitas type SGE and ELE, perfect for applications of Titanium, also are available in these sizes of plate. The plaquitas SGE have been designed for the milling half and heavy, whereas the ELE would have to use when they require low efforts of cutting and to avoid the contribution of material to the edge of cutting.
Tambien Is available a plaquita of 20 millimetres of size, compatible with the milling cutters KSRM. There are three available geometries in this size. The geometry ELF has been designed to generate low efforts of cutting and avoid the contribution of material to the edge of cutting. By his part, the plaquitas SGF are of general use and the SHF employ in applications of desbaste of high performance.
The linea of milling KSRM this available in a wide range of bodies of milling and milling cutters of mango with capacity to realise operations of cajeado, works in rampa, interpolacion helicoidal and plunge. The bodies have been designed with a big desahogo to achieve excellent capacities of rampa and evacuation of shaving. The screw antigiro provides an absolute stability in advances of high work and to high strengths of cutting. This component antigiro allows until eight positions indexables for the plaquitas of 12 and 16 millimetres. The milling cutters of refrentar that use plaquitas of 20 millimetres have been designed for desbastar titanium to big depths of cut thanks to the positive geometry of the plaquitas. The milling cutters KSRM of size 20 millimetres allow six twists indexables and use for diameters from among 63 and 200 millimetres.