Kenci signature tools
www.kenci.com
The KB9610 on the basis of hard metal with low content of CBN has an aluminium CVD of newly developed multi-layer coating, which provides this quality of court a high thermal resistance and an optimal protection against chemical wear. Unlike other qualities of PCBN cutting, these features make that KB9610 is ideal for applications at high cutting speeds.
The pre-treatment guarantees a high degree of adherence of the coating to the substrate, which minimizes the coating is astille. The coating also polished surface to reduce the regrowth of edges of the material of the piece and to achieve a high surface quality of the piece.
The main area of application of KB9610 is the finish and semi-processed of hardened materials (HRC > 45), hard coatings and iron cooled in court not interrupted. The maximum cutting depth should not exceed 0.5 mm. For an optimal application, please, see the table of pages B20 and B21 forward speed. Compared with conventional PCBN cutting materials, 10-20% cutting speed may increase to achieve higher productivity.
The KB9610 product range includes a number of Kenloc and Screw-on geometries as well as Wiper geometries for finishing and semi-processed. The KB9610 product line is based on a design of multiple edges of cut (Multi Tip, "mt"). In addition, KB9610 product range also includes positive Kendex geometries in design Mini Tip ("M").