This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at La familia Tiger•tec Silver sigue creciendo con la ampliación hacia placas más pequeñas

Walter incorporates the size of plate 09 for the turning of material ISO-

The family Tiger•tec Silver keeps growing with the extension to plates smaller

Editorial Interempresas22/10/2012

‘Reduction' applied no only to the trucks, also to the plates of mechanised. The optimisation of the adaptation of the size of the plate to the piece and to the past gives like result a saving of costs and also a reduction of the resources of dust of hard metal. Walter has taken this in account when expanding his rank of interchangeable plates of the family Tiger•tec Silver ISO P.

In some cases, where the plate used is the CNMG1204, the plate of inferior size CNMG0903 can be sufficient. The fact that the ‘small ‘' in a lot of cases result to be the true ahorradores of costs since when having a lower cost overlooks . Walter, therefore, has incorporated the size of plate 09 inside his family Tiger•tec Silver for the turning of material ISO-P.

Walter is prepared for the supply of plates Tiger•tec Silver for material ISO-P in the geometries CNMG0903, SNMG0903 and TNMG0903 for pieces and past small.

With the intention to cover all the typical applications of these sizes, the users can choose between the following basic forms: CNMG0903, SNMG0903 and TNMG1103 in two rompevirutas FP5 and Mp3 for the works of fine-tune and mechanised half. All the geometries are in negative plates, what allows us have the maximum number of edges of cutting. The forms ‘C' and ‘S' have eight edges of cut, whereas the form ‘T' has six. The operations that like rule, before did with small positive plates, now also can be done with negative plates much more efficient in costs (examples can be mandrinados interns of small diameters, mechanised in machines multihusillos with loaders of bar, etc.) with the advantage added of the savings obtained by the utilisation of the new family of materials of cut Tiger•tec Silver. His excellent productivity (+75%) has been already showed in a lot of occasions, and of course, the profit of the production where small past are required.

Walter supplies system of tool holders for the mechanised internal and external and these same systems of tie up are standard for these small plates, including bars of mandrinar with internal refrigeration beginning in diameter of 16 millimetres. For mechanised external, the user can choose between fixation by brida or by crowbar, beginning in cuadradillo of 12 millimetres. The rank of tool holders takes into account all the types of turning that find usually. With this expansion, the current rank of Tiger•tec Silver for material ISO P is giving another step to forward. “We now have more than 500 plates in our rank, based in the variety of forms ISO”, explains Gerd Kußmaul, that is the world-wide manager of gestión of products of turning of Walter.

Beside the extension of the small plates, the rank of Walter is also growing. For example, the two rompevirutas of negative plates of an alone expensive NRF and NRR for the mechanised universal and big desbaste, already are available in the family Tiger•tec Silver.