Wittmann Battenfeld Spain, S.L - Temperature regulators
Wittmann
regulators of discharge of water of refrigeration
The regulators of discharge of water of refrigeration of Wittmann are an essential team for all the machines of injection.
The advantages that offers are diverse: the instantaneous indication of the blockade of the circuits of refrigeration avoids the production of defective pieces, the constant control of temperature of the mould avoids the contraction of the pieces and the rings of the tubes of adjustable vision show the deviation of the discharge allowing adjust fast of the same.
The regulatory discharge of water are very easy to clean. Simply it is necessary to remove the cap of upper access and a brush (supplied) clean quickly the tubes are to extract them.
They are easy to extract. The tubes of individual vision can extract and place easily, if necessary,. The together tóricas of precision close herméticamente in the tube, totally, to proof of escapes, even under maximum loads.
The boards tóricas EPDM are resistant to the heat and to the water, the tube of vision is of polyamide 12, an upper material in comparison to the polycarbonate, when it uses water to high temperature that incorporates of series.
The marks of reference are moldeadas and no painted.
The steps of greater water minimise the restrictions of the discharge, provide a volume of upper discharge through the mould and improve the performance of transfer of the heat. In fact, the fall of pressesure of his regulators is roughly the half that in the units of the competition. This is an important difference if the pressesure of the water of plant is drop.
The regulators of discharge include insertions of threaded brass of precision (model 301) or takings of brass (model 101) for his connections of hoses of deficient design that use threads moldeadas with tendency to the escapes, that can break easily.
The carcasas moldeadas of oxide of polifenileno reinforced for an intense industrial use. All the units verify regarding escapes to 100% before his sending.
The advantages that offers are diverse: the instantaneous indication of the blockade of the circuits of refrigeration avoids the production of defective pieces, the constant control of temperature of the mould avoids the contraction of the pieces and the rings of the tubes of adjustable vision show the deviation of the discharge allowing adjust fast of the same.
The regulatory discharge of water are very easy to clean. Simply it is necessary to remove the cap of upper access and a brush (supplied) clean quickly the tubes are to extract them.
They are easy to extract. The tubes of individual vision can extract and place easily, if necessary,. The together tóricas of precision close herméticamente in the tube, totally, to proof of escapes, even under maximum loads.
The boards tóricas EPDM are resistant to the heat and to the water, the tube of vision is of polyamide 12, an upper material in comparison to the polycarbonate, when it uses water to high temperature that incorporates of series.
The marks of reference are moldeadas and no painted.
The steps of greater water minimise the restrictions of the discharge, provide a volume of upper discharge through the mould and improve the performance of transfer of the heat. In fact, the fall of pressesure of his regulators is roughly the half that in the units of the competition. This is an important difference if the pressesure of the water of plant is drop.
The regulators of discharge include insertions of threaded brass of precision (model 301) or takings of brass (model 101) for his connections of hoses of deficient design that use threads moldeadas with tendency to the escapes, that can break easily.
The carcasas moldeadas of oxide of polifenileno reinforced for an intense industrial use. All the units verify regarding escapes to 100% before his sending.
