DMG Mori Ibérica, S.L.U. - Machining centres
DMG - Mori Seiki DMC 1150 V
Machining centres vertical: it admits load of until 1.500 kg
The DMC belongs to the third generation of the series of vertical mechanised centres. Provisto Of a powerful equipment that includes a husillo of 14.000 min-1 and a table of fixed machine that admits a maximum load of 1.500 kg.
It has fast advances of 36 m/min in all the axles and refrigeration of the accionamientos and the guides. The nuts of the mechanisms of husillos of balls and the linear guides refrigerate by means of regletas of attack, evacuating of efficient way the heat of friction.
The DMC 1150 V has some limits of route of 1.150 x 700 x 550 mm and expands of practical way upwards, in particular with the 700 mm in the steering And, the range of machining centres vertical.
It supplies with the standard equipment with the ERGOline of 19 inches with control Heidenhain TNC640 as well as with Operate 4.5 on Siemens 840D solutionline.
It includes between his provision the corporate design Jealousies of DMG Mori with ERGOline of 21,5 inches and Siemens.
It has fast advances of 36 m/min in all the axles and refrigeration of the accionamientos and the guides. The nuts of the mechanisms of husillos of balls and the linear guides refrigerate by means of regletas of attack, evacuating of efficient way the heat of friction.
The DMC 1150 V has some limits of route of 1.150 x 700 x 550 mm and expands of practical way upwards, in particular with the 700 mm in the steering And, the range of machining centres vertical.
It supplies with the standard equipment with the ERGOline of 19 inches with control Heidenhain TNC640 as well as with Operate 4.5 on Siemens 840D solutionline.
It includes between his provision the corporate design Jealousies of DMG Mori with ERGOline of 21,5 inches and Siemens.
