Maquinser, S.A. - CNC turning centers

The centre of turning MW40G that commercialises Maquinser is a turn of nut to the popular MW50, oriented to pieces of around 50 mm of diameter by 90 mm of length. The similarities in time of load/downloads, robot grantry of 3 axles, designs of bancadas separate for total elimination of vibrations and husillos integrated for time faster are evident.

The MW40 has two towers of 10 stations. The optional characteristics include motorised tools of direct transmission until 6.000 rpm in each station, as well as an axis And in both turret milling machiness that increases + / - 25 mm the route what results useful for the taladrado/milling descentrada. This means that it is not necessary to realizar secondary operations and will be able to realizar pieces more complex.

thermal sensors sensors trip of 5 micras or less can attain even with turret milling machiness of indexing. The characteristics of design such like turret milling machines estacionaria, a design of bancada with a low centre of gravity and wide area of work, direct motors and prismatic guides in X / Z convert to the MW40 in a specific tool to work with tolerances adjusted. This precision can increase with a measurer of Murata integrated that allows to compensate the tolerances in real time.

Capacity of mechanised:

- maximum Diameter of piece: 50 mm.

- Maximum length of piece: 90 mm.

- Dishes: 4” or 5”.

- Engine: direct - 3,7 kW / 8.000 rpm.

- turret milling machines milling machiness: 2 of 10 positions.

- Trip X: 155 mm.

- Trip Z: 170 mm.

- Tools of mechanised external: 16 x 16 mm / 20 x 20 mm.

- Tools of mechanised inner: diameter 25 mm.

- Plant: 1.590 mm x 1.950 mm.

- Weight: 3.500 kg.

Motorised tools:

- it Improves engine: 1,4 kW / 5.000 rpm.

- Maximum revolutions: 6.000 rpm.

- Maximum tool milling: diameter 7 mm.

- Threaded maximum tool: M6.

- Trip axis And: +/-25 mm / 12 m/min.