Walter Tools Ibérica, S.A.U. - Turning inserts
Tiger Tec Silver
Interchangeable plates: with PVD coatings with aluminum oxide
Interchangeable plates with PVD coatings with aluminum oxide increase resistance to wear by temperature without losing the commitment with tenacity. Friction on the cutting edge is lower by micro-optimized structure.
The Quartet composed of four degrees for cutting applications and slotted have the following names: WSM13S, WSM23S, WSM33S and WSM43S. The WSM13S grade is suitable for machining with stable conditions due to their distinctive hardness. The grade WSM43S is the first choice in conditions of unstable moorings, low speed of cut and cuts interrupted due to his exceptional tenacity. The intermediate variants WSM23S and WSM33S cover relatively large middle area. This offers an optimum for each application and for each material.
When these grades are used in combination with the chipbreakers, he is reached in the process of cutting and grooving a longer life of the tool and an absolutely necessary in this type of application stability. In particular, the defined and sharp cutting edges can be achieved thanks to the fact that the thickness of PVD coatings is less than usual.
The Quartet composed of four degrees for cutting applications and slotted have the following names: WSM13S, WSM23S, WSM33S and WSM43S. The WSM13S grade is suitable for machining with stable conditions due to their distinctive hardness. The grade WSM43S is the first choice in conditions of unstable moorings, low speed of cut and cuts interrupted due to his exceptional tenacity. The intermediate variants WSM23S and WSM33S cover relatively large middle area. This offers an optimum for each application and for each material.
When these grades are used in combination with the chipbreakers, he is reached in the process of cutting and grooving a longer life of the tool and an absolutely necessary in this type of application stability. In particular, the defined and sharp cutting edges can be achieved thanks to the fact that the thickness of PVD coatings is less than usual.
