Pferd-Rüggeberg, S.A. - Cutting wheels
Pferd Líneas Pferd
Disks of tronzar of diamond: for several types of materials
According to the material with which go to work Pferd has of a disk of tronzar of suitable diamond. For example, for soft and abrasive materials, an aglomerante hard like the models ST and DZ. For hard materials, an aglomerante soft, the models W and Or. The model Pferd Plus-Extra And is the most economic alternative for easy materials of tronzar. The model Pferd Special FL is thought for azulejos and baldosas.
The soft stones (abrasive) and the materials of construction demand an aglomerante hard resistant to the wear so that the diamonds last the time that require the work. An aglomerante soft would wear out very fast and the diamonds would give off prematurely.
The tronzado of hard materials demands an aglomerante softer, so that the diamonds without tip can break leaving space to the new diamonds more aggressive.
Advantages of the disks of tronzar of diamonds.
Periods more brief of work. Big number of cuttings of work and big length. Fewer changes of tool. Minimum widths of cutting. Surface of clean cutting without break of singings. Works exentos of fatigue, minimum strength. Under level of noise.
Instructions of use.
1. Follow obligatoriamente the steering of twist of the disk (indicated with an arrow in the disk).
2. Not working without the carcasa protective of the machine.
3. Attach the piece of work.
4. Carry protective glasses.
5. When cutting, no presionar (is sufficient the weight of the machine), and no ladear.
6. Avoid the sobrecalentamiento. Leave turning the disk in empty so that it cool.
7. Cut in depth, if it was possible tronzar the piece in an only cut and move the disk slightly of up down (oscillate).
The disks of tronzar of diamond Pferd use in dry cut.
When cutting material very hard as for example, concrete with high content of gravel (concrete washed), exists danger of sobrecalentamiento and the sparks around the disk indicate it.
To avoid damage the disk has to stop immediately the tronzado.
It leave that the disk turn in empty so that it cool. If they follow producing sparks, would have to reafilar the segments of the disk with the bar afiladora.
The line Pferd-Súper.
The line Pferd-Súper achieves an optimum quality and an optimum performance. It characterises by a diamantado of high quality.
The welding laser realised selectivamente in the soul of steel (crack Detenso) reduces considerably the level of noise.
The souls of steel High-Tech Pferd with diameters of 178 and 230 mm are pretensadas, that is to say, has sobrelaminado selectivamente a tension of pressesure that allows a greater thermal sensors load of the soul of steel.
Model W for hard materials and semiduros, materials of construction, concrete (even armed), concrete washed, knit, brick recocido, hard stone and granite.
Model ST for soft materials, abrasive, stone arenisca, clay, concrete, abrasive, etc.
The line Pferd-Plus.
The line Pferd-Plus, of big performance, contains a diamantado of very good quality and a soul of steel improved (pretensada).
The model Or universal for usual materials in the construction, concrete, concrete washed, knit, brick recocido, etc.
The model DZ for stone arenisca, clay, abrasive concrete, etc.
Line Pferd-Plus-Extra and line Pferd-Special.
The disk of tronzar of diamond Pferd-Plus-Extra is an economic model with soul of steel pretensada and segments of cut soldered with laser. The model And is for easy materials to cut, for example, stones of concrete semiduras and soft.
The model Pferd-Special FL is thought for azulejos, baldosas and blackboards.
Display And bar afiladora.
It exists a display of Pferd for disks of tronzar of diamond of a diameter between 110 until 230 mm. The content is according to demand. Besides it exists a display to hang of sheet with covers of plexiglás.
If it was necessary, the disk of diamond Pferd can afilar or desembozar cutting fine plates of a bar afiladora. By means of the process deletes a part of the aglomerante metallic of the segments of cutting. The external diamonds despuntados delete of the abrasive segment, freeing new diamonds. After this operation, the disk of tronzar of diamond goes back to be sharp.
The soft stones (abrasive) and the materials of construction demand an aglomerante hard resistant to the wear so that the diamonds last the time that require the work. An aglomerante soft would wear out very fast and the diamonds would give off prematurely.
The tronzado of hard materials demands an aglomerante softer, so that the diamonds without tip can break leaving space to the new diamonds more aggressive.
Advantages of the disks of tronzar of diamonds.
Periods more brief of work. Big number of cuttings of work and big length. Fewer changes of tool. Minimum widths of cutting. Surface of clean cutting without break of singings. Works exentos of fatigue, minimum strength. Under level of noise.
Instructions of use.
1. Follow obligatoriamente the steering of twist of the disk (indicated with an arrow in the disk).
2. Not working without the carcasa protective of the machine.
3. Attach the piece of work.
4. Carry protective glasses.
5. When cutting, no presionar (is sufficient the weight of the machine), and no ladear.
6. Avoid the sobrecalentamiento. Leave turning the disk in empty so that it cool.
7. Cut in depth, if it was possible tronzar the piece in an only cut and move the disk slightly of up down (oscillate).
The disks of tronzar of diamond Pferd use in dry cut.
When cutting material very hard as for example, concrete with high content of gravel (concrete washed), exists danger of sobrecalentamiento and the sparks around the disk indicate it.
To avoid damage the disk has to stop immediately the tronzado.
It leave that the disk turn in empty so that it cool. If they follow producing sparks, would have to reafilar the segments of the disk with the bar afiladora.
The line Pferd-Súper.
The line Pferd-Súper achieves an optimum quality and an optimum performance. It characterises by a diamantado of high quality.
The welding laser realised selectivamente in the soul of steel (crack Detenso) reduces considerably the level of noise.
The souls of steel High-Tech Pferd with diameters of 178 and 230 mm are pretensadas, that is to say, has sobrelaminado selectivamente a tension of pressesure that allows a greater thermal sensors load of the soul of steel.
Model W for hard materials and semiduros, materials of construction, concrete (even armed), concrete washed, knit, brick recocido, hard stone and granite.
Model ST for soft materials, abrasive, stone arenisca, clay, concrete, abrasive, etc.
The line Pferd-Plus.
The line Pferd-Plus, of big performance, contains a diamantado of very good quality and a soul of steel improved (pretensada).
The model Or universal for usual materials in the construction, concrete, concrete washed, knit, brick recocido, etc.
The model DZ for stone arenisca, clay, abrasive concrete, etc.
Line Pferd-Plus-Extra and line Pferd-Special.
The disk of tronzar of diamond Pferd-Plus-Extra is an economic model with soul of steel pretensada and segments of cut soldered with laser. The model And is for easy materials to cut, for example, stones of concrete semiduras and soft.
The model Pferd-Special FL is thought for azulejos, baldosas and blackboards.
Display And bar afiladora.
It exists a display of Pferd for disks of tronzar of diamond of a diameter between 110 until 230 mm. The content is according to demand. Besides it exists a display to hang of sheet with covers of plexiglás.
If it was necessary, the disk of diamond Pferd can afilar or desembozar cutting fine plates of a bar afiladora. By means of the process deletes a part of the aglomerante metallic of the segments of cutting. The external diamonds despuntados delete of the abrasive segment, freeing new diamonds. After this operation, the disk of tronzar of diamond goes back to be sharp.
