Chunky in the 2006 BIEMH
Lenses for laser Duralens
Whole process related to the manufacture of lenses, is carried out in the installations I Ophir-chunky and according to the ISO-9002 certification. This process includes the inspection of the raw material, grinding, polishing, coating, its verification to 100 per cent and quality control.
The characteristics of the Ophir Duralens lenses are:
• Design type meniscus to achieve the minimum point of focus.
• Very low absorption
• Excellent surface quality. Using special techniques of Ophir's micropulido
• Maximum focus accuracy
Wing Bend, a revolutionary technique in bending
• Possibility of folded wing extremely close.
• Drills near the bending, not deform.
• Variable thickness with the same cutter.
• Uniform folded.
• Are no marks in the faults, especially for stainless and prelacados.
• The angles are always equal and exact.
• To be a useful map, avoids errors to Cap...
This equipment is manufactured with high precision machinery, therefore, any worn part is replaceable, avoiding the total change in the inventory, saving. It is served in fractions of 200,100,50 and minor, fully dockable, sections without marks.
Faults in 180 ° to 90 °, accuracy and repeatability are guaranteed and will ensure greater performance with respect to the matrix standard of 70 percent.
Numeric control for folder and shear
The subsequent mechanical system offers different possibilities, and can apply mechanical single-engine and transmission, or two engines with electronic auto-alineamiento, always depending on the tonnage and length of your machine.
With the number of controls chunky can govern up to 4 independent axes, X 1 - X 2 simultaneous (length of bending), Y1 (depth of bending in degrees) and R1 (adjustable height of the ceiling). Screen is liquid quartz, we control the positioning of axes speed, we introduce absolute or relative levels, and we can extend the memory of the control by cassettes Eprom.
Systems of stacking to shear
• Support of sheet metal, which keeps it flat for ceiling with precision in the cutting process. It is retractable pneumatically for sheet metal cut once fall gently on the conveyor table.
• Auto evacuator remnants, which selects the cutting and deposits it a container appropriate for this.
• Tape evacuadora, transporting the cut sheet and through a system of supports and sensor, prevents the plates be marked or scratched when they are piling.
• Stacker machine, through a system of limits and photocells allows the package to be fully packed.
• And other optional modules that automatizarán to maximize the system for the disposal of packages.
These systems avoid working 2 operators in the shear, so its depreciation is in the short term. Suitable for cutting of large sheet and especially of stainless and undercoated sheet metal cutting.
Systems of inclusion
It offers a wide range of machinery, from the laptop with carriage 412, until the Window Touch with numerical Control and automatic system load with several stations.
Tools folder
Manufactured with steel C-45, C-45 steel discounted, as well as steel 42 CrMo4, always depending on the figure of the tooling and burdens that must endure.All utensils are temperate to induction in the areas of wear. The hallmarks and some arrays, also are lines to prevent rust and mark the sheet in the phase of bending.
Tooling for CNC punching machines
For machines with tooling type Amada, Mate proposes the Ultra series, which brings together the features for quick change of equipment and that allows to use the hallmarks that other manufacturers have designed exclusively, forcing his client to not be able to access other manufacturers of construction equipment, with the consequent problem of having to accept their prices and qualities...
Deburring of metallic surfaces
Deburring of steel "845"
It desbarba or cant to 1 mm. all kinds of material thickness from 0.5 to 30 mm, including coated or painted before. Support a set of pieces on the conveyor belt, feed automatically and carried out two operations of Deburring (superior-inferior) slightly withdrawn; and in other 845 and 846 models have more heads performing other functions. Once desbarbadas the pieces, they are piling in a container. The deburring varies depending on the speed of the conveyor (adjustable electronically) and the grain of the abrasive.