Pavilion 6, street B-C
Fendt Presents in FIMA the imponentes series 800 and 900 Phase 4
The arrival of the 2014 supposes a new jump regarding rule of reduction of broadcasts refers . The first models of Fendt in adapting to said normative are the new series 800 and 900. Of the series 800 keep the 4 existent models in the previous series (822, 824, 826 and 828) with nominal power (EC 97/68) comprised between the 226 and the 287 CV of nominal power. Regarding the series 900 SCR has reduced of 6 to 5 models (927, 930, 933, 936 and 939) with a nominal power (EC 97/68) of 275 to 396 CV. Both series come with a concept of new engine that aúna the efficient technology SCR with a passive filter of particles diesel CSF. The filter of particles is free of maintenance and does not need to inject fuel for the realisation of the process of regeneration of the filter.
The new engine mounts two turbocompressesors intercalados with two intercooler to refrigerate the gases of leakage. Thanks to the new system achieves enter a greater volume of air in the combustion, that improves the performance and generates greater power to lower revolutions and a curve of pair more uniform. Now the curve of power is more homogénea in the stretch of 1.800-2.200 rpm, achieving the same power in all the stretch and coinciding therefore the maximum power with the nominal.
The innovation of Fendt receives a recognition deserved
But no only the tractor in if same is the protagonist in FIMA, also is the technology of avant-garde that Fendt develops to offer to the algricultor professional machines more efficient. Have, for example, the new system of autoguiado of Fendt, designed for small and average exploitations with need to optimise resources without investing big quantities of money. The system VarioGuide Light, incorporated in the terminal of 7", has the possibility to realizar works with the autoguiado, with the signal of correction Egnos, with a dynamic precision of until ±20 cm.
Special recocimiento, with a Technical Novelty FIMA 2014, has received the hydraulics attachment Flatflace. At present the possibilities of connection by means of the hydraulics system of the tractor are enormous, exist quite a lot of types and sizes of distinct attachment. Fendt Has designed this new block of hydraulics attachments that achieves aunar in an only different block types and sizes of attachment. The connection realizar of fast and simple way even with the hydraulics attachment under pressesure, besides the flat face of the block favours the prevention of losses of pressesure and escapes of oil. The solution has been developed entirely by Fendt and the attachment is designed for discharges of until 75 l/min and attachments of 1/2", 3/4“and 5/8”, on the other hand, the maintenance is very comfortable of face to the user.
The macroempacadora Fendt 1290 XD neither lacking to the appointment
Fendt Has entered in his range of macrobalers the model 1290 XD, able to produce bales of 1,2 x 0,88 m and that shares a lot of common components and very tested in other balers inside the range. The meaning of XD: ‘Extra Density', means that it reaches between a 15 and 20% more than density that the model of empacadora standard Fendt 1290. The new model conserves all those characteristic that his owners and operators sue: simplicity, longevity, greater reliability and greater productivity with some low costs of maintenance.
The empacadora 1290 XD will be available in two configurations: feeding of fork or Packer (N) and feeding of rotor or Cutter (S).