Hosokawa Solids, S.L. - Pneumatic and vacuum conveying equipment
Vacu Fill
Pneumatic conveyors: by empty sequences
Reliable technology for the safe carrying of even those products that have bad flow properties.
Principle of operation: load and alternative emptying of the cargo carrier by sequences of vacuum aspiration vacuum using bulk solid TSF; sequentially by the TSF.
Total emptying of the TSF without pressure or with a slight excess of pressure.
Its advantages include the following: • management and careful transport of sensitive and abrasive products.
• Extremely efficient operation due to dense phase transport.
• Simple interconnections.
• Flexible and, therefore, it is possible to transfer to virtually any system.
• Design without dead zones and easy removal for a quick clean.
The sequences of vacuum TSF cargo carrier will be released using a vacuum pump when emptying and dust filter product inlet valves are closed. The necessary vacuum can be adjusted depending on the product and transportation distance properties.
Vacuum pump valve closes to attain the value of empty set.
The "input product" valve opens for vacuuming solids in bulk. The vacuum generated aims now solids in bulk in the dense phase of the conveyor by vacuum TSF sequence.
When is reduced vacuum valve "product entry closes and opens the"drain valve". The vacuum process is supported by the dust filter.
After the vacuum process vacuum TSF scripts loading conveyor is emptied again and repeats the sequence.
Principle of operation: load and alternative emptying of the cargo carrier by sequences of vacuum aspiration vacuum using bulk solid TSF; sequentially by the TSF.
Total emptying of the TSF without pressure or with a slight excess of pressure.
Its advantages include the following: • management and careful transport of sensitive and abrasive products.
• Extremely efficient operation due to dense phase transport.
• Simple interconnections.
• Flexible and, therefore, it is possible to transfer to virtually any system.
• Design without dead zones and easy removal for a quick clean.
The sequences of vacuum TSF cargo carrier will be released using a vacuum pump when emptying and dust filter product inlet valves are closed. The necessary vacuum can be adjusted depending on the product and transportation distance properties.
Vacuum pump valve closes to attain the value of empty set.
The "input product" valve opens for vacuuming solids in bulk. The vacuum generated aims now solids in bulk in the dense phase of the conveyor by vacuum TSF sequence.
When is reduced vacuum valve "product entry closes and opens the"drain valve". The vacuum process is supported by the dust filter.
After the vacuum process vacuum TSF scripts loading conveyor is emptied again and repeats the sequence.
