Egasca in the 2004 BIEMH
The ABX-51TH model is the center of turning for bar work more complete the wide range of machines offers the prestigious Japanese manufacturer Miyano Machinery. It's a machine that incorporates three turrets with 12 motorized stations each one and two spindles with control on the "C" axis function. Furthermore, the fact the two upper turrets available to travel on the shaft "And" allows to eliminate many second operations.
True to the philosophy of Miyano, the guides are prismatic and have been rasqueteadas by hand with what an extraordinary rigidity and precision is guaranteed even after many years of operation.
Center of turning 6-axis Miyano model BNJ-42S
The machine consists of a motorized main turret of twelve stations, a subtorreta of six stations and two spindles, faced with the c axis control
Among the new features that comes up before other previous models, fit to highlight the following:
- Follow up of the heads feature allows the turret to work on two headsets simultaneously.
- The subhusillo available on the Z axis, both the X axis displacement allowing eccentric operations.
- Displacement of cars speeds have increased but are still prismatic guides for its high rigidity, precision and excellent results over many years of operation.
- Optionally, the machine has a device for the expulsion of long pieces through the subhusillo.
- It has a greater capacity of mooring subhusillo machine and with a more powerful engine.
- He has been a more compact design and a better accessibility to the interior of the machine.
Transfer of Eubama divisor drum machine model S-8 Hy CN
This machine allows up to 18 operations of all kinds (drilling, threading, milling, turning, crimped, brochado, woodcarving, marking, etc.) in a single mooring, being the time of total cycle of the piece which is the longest operation.
His party of mineral casting allows a better deshogo of the chip and thermal stability significantly higher.
All guides are prismatic and have been rasqueteadas by hand in order to achieve a great stability and precision in large bursts of chip operations. Two spindles to balls for each axis, a low centre of gravity and a film of pressurized oil from 3 m thick on the guides allow a high acceleration and speeds of fast forward of the carts of 48 m/min the least detrimental to accuracy.
The machine incorporates a screw lubricated by conservator with a powerful engine and a bearing of 110 mm diameter with what is achieved to eliminate vibrations even in the most severe working conditions.
Control of latest generation Fanuc 30i-M offers the latest advances in the technologies of control, monitoring and communication.
Toyoda Mitsui model FH-630R palletizing horizontal machining center
All guides are prismatic and have been rasqueteadas by hand in order to achieve a great stability and precision in large bursts of chip operations. Two spindles to balls for each axis, a low centre of gravity and a film of pressurized oil from 3 m thick on the guides allow a high acceleration and speeds of fast forward of the carts of 48 m/min the least detrimental to accuracy.
The machine incorporates a screw lubricated by conservator with a powerful engine and a bearing of 110 mm diameter with what is achieved to eliminate vibrations even in the most severe working conditions.
Control of latest generation Fanuc 30i-M offers the latest advances in the technologies of control, monitoring and communication.