Maquinser Shows in the BIEMH the novelties of his represented

The advanced design of the machine in structure of portico built in smelting Mehanite, with guides of rollers crossed in the three axles allows to increase the performance of the machine until the 48 m/min in fast, increasing the precision. The husillo main of 15 kW, to direct engine, with ceramic threads and refrigerado by oil of 15.000 rpm, supposes to reach the necessary parameters so much for the mechanised of desbaste as of finishing in temperate materials, so usual in the world of the mould and the matricería.

The CNC Siemens 840 D + Shop Mill offers all the necessary provision for the copied of high speed, in addition to an easy handle in the programming on foot of machine.

Automation is the keyword in which they base all the products manufactured by Muratec, world-wide specialist in lathes of double husillo with load by robot and systems key in hand.

To the already known series MW of two cabezales parallel, adds the series GT with double robot, to increase the production without penalising the times died of load/downloads. With a capacity of piece of until 120 metres of diameter and 80 millimetres of length and a loaders of pieces of 14 stations, the MW 120 GT is one of the machines with greater acceptance inside the market of the providers of pieces of automotive sector.

All the products of the range Muratec characterise by his high reliability and precision. The more than 300 machines sold in Spain, are the best exponent of the confidence of the customers in the product commercialised by Maquinser from does more than 15 years. If to the high provision of the manufactured of Muratec, adds the personalización that Maquinser Engineering offers to his customers, obtains the ideal solution to the specific needs of the customers of average-high production.

Matsuura, world-wide specialist in the mechanised of high speed and five axles, shows the MX 520 like the simple transition of the mechanised of 3 usual axles to the of 5 axles of high provision and precision The machine MX 520 is a centre of mechanised with movements in the cabezal of the 3 conventional axles —X: 630, And: 560 and Z: 510 millimetres— and a table tilting of 2 axles To: -125º+ 10º and C: 360º, until 500 millimetres of diameter. The machine can work until 32 m/min in fast and of work, and characterises by his perfect ergonomics, with a door of access with opening of 805 millimetres, and with a distance until the centre of the table of only 385 millimetres. The opening of the upper streamlining allows to load heavy pieces until 200 kilos and with some dimensions of 520 x 350 millimetres of height by means of crane. Comandada By a CNC Fanuc 31 i, incorporates the system MIMS of chequeo of collisions in addition to functions like the saving of power or the ease of programming and change of piece.

By his part, Matsuura shows the high productivity of his horizontal centres with the H Plus 405, middle-sized but with a greater productive performance. The machine, with palé of 500 x 500, allows to mechanise a piece of 700 millimetres of diameter and 850 of height. The routes of all his axles X, And, Z of 660 millimetres, a table with 4º axis with 100 rpm, joined to the 60 m/min of the movements in fast and of work, present it like one of the most productive machines and reliable of his segment. The cabezal to direct engine of 12.000 rpm and his cambiador of tools of disk servo controlled of 51 positions, joined to the system of control of thermal sensors stability thermal sensors sensors Meister, strengthen his leadership in the market. The control Fanuc series 30, the more than the range, allows to manage the high provision of the machine to his maximum level to guarantee a high production in the most demanding precisions.

Biglia, company stood out in the manufacture of lathes CNC, presents his machine of turning-milling integrated cheese cheese. It has of prismatic guides milling, temperate and rectified of big size that allow to bear the moments of inertia and absorb the vibrations properly. The slide of the axis portacabezal is of guided of rodadura of high rigidity. Biglia Designed the bancadas to have of the minimum possible interference and keeping a centre of low gravity, to increase the precision.

The cabezal main, as well as the subcabezal (optional) are of integrated cheese cheese type, with rotor Fanuc, which allow to obtain some greater accelerations and deceleraciones, as well as an exceptional power thanks to the double bobinado of the motors Fanuc. The cabezal of turning and milling allows a minimum increase of 0,001º to 210 º of area of rotation (+105 – 105º), allowing realise milling bent, taladrados and threaded etc. Besides, has of 10.000 rpm with system of tie up HSK-63. For mechanised of big start the cabezal has of system of tie up mechanic by means of toothed crown type Hirth. The machine, managed by a CNC Fanuc 31 i incorporates, in addition to the programming assisted, the management of life of tools and a system anticolisión to guarantee the programming of pieces of extreme complexity.

Pioneering company under construction of machinery CNC in Taiwan, with a continuous development of R&D, presents the model V-50-L. The rigid structure of the machine, built in smelting Mehanite of high quality, joined to skate them of rollers crossed sobredimensionados, endow to the machine of a big rigidity and high dynamism that allow to reach until the 36 m/min of travel in fast with high precision. The routes of the axles are: X: 1.270; And:635; and Z: 610 millimetres. A husillo main of 18,5 kW and 10.000 rpm, together with the CNC Fanuc 0i MC of 10,4” with ‘manual guide i', convert the machine is an excellent solution to the demanding needs of the mecanizadores in the competitive current market.