Proposals MAQcenter to achieve a more efficient production and intelligent
27 April 2012
![New logo of MAQcenter New logo of MAQcenter](https://img.interempresas.net/fotos/620449.jpeg)
MAQcenter Works to give a global and complete solution for the companies of the mechanised, and by this reason includes in the portafolio of products, the best options to satisfy the needs of his customers. Between the possible solutions, in this edition stand out Alberti, TPM Trak and Optomec between others.
Alberti Is an Italian manufacturer specialised in the production of cabezales angular for centres and tool holders for lathes, with an experience of 30 years in the market, has developed a new linea for the micromecanizado with cabezales straight of until 60.000 rpm and angular until 30.000 rpm.
Presents also the software of control of productivity TPM Trak that allows the analysis in real time of all the parameters of a machine, cell of production or of all a factory, according to the needs of the customer. It is a personalised solution that increases the profitability of the production of any scheme CNC.
MAQcenter Enters the solution but advanced in ‘additive manufacturing' of the hand of Optomec, whose technology has the guarantee to be established in entities of prestige such as the NASA or the same army of EE UU. His applications develop so much in the aerospace sector and defence, biomédico, electronic components, mould and matrix amongst other. The alloy of new materials, the prototipaje fast or the repair of key pieces and of high cost are some of the keys that contributes this technology. With Optomec arrives where does not reach the mechanised.
More than 1.500 installed machines in Spain, and 110 years of experience, avalan the durability on a long-term basis, the precision and the reliability of the mark Okuma. His experience, solidez, the perfect balance of structure and functionality, a process of production specialised and the technologies more vanguardistas have turned him into a mark of reference. His innovations have been award to international level during the year 2010 and 2011 by the most prestigious Prizes to the Technological Advances as for example, the concept Thermo Friendly (TFC), the system anticolisión (CAS) and the Machining Navi, a function of optimisation of processes and improvement of the productivity by means of the elimination and prevention of the vibrations.
Faithful to his lemma ‘One Source. First Choice', Okuma follows investing in the development so much of his machine tool as of his technology of numerical control, since it is only provider in his processes.
Between the range of machines multifunción presents the last novelty of the series Multus, specifically the model B300W series II that incorporates the OSP P300S. Until seven axles of work, and mechanised of high precision thanks to the concept ‘TFC' that allows a control of the possible deviations because of the thermal sensors effect of dilatation and contraction of the machine. Instrumented with tactile signpost, has like strong point the new protection anticolisión CAS.
Regarding the novelties of lathes, presents the new LT2000 EX with 3 motorised turret milling machiness of 16 tools each one and the possibility of axis And in all they. Regarding the previous version increases the power, the step of bar and the options of automation.
![New Multus B300W series II of Okuma New Multus B300W series II of Okuma](https://img.interempresas.net/fotos/620450.jpeg)
Between the wide range of machining centres presents the horizontal centre MB5000, of high speed and production, with double palé of 500 millimetres and speeds of 60 m/min. treats of an ecological team, since it downloads the just shavings under the husillo with a design of central channel. The cavity of shavings is wider increasing the efficiency of collected, downloading of immediate form the hot shavings, keeping like this the zone of mechanised clean. His good accessibility, with transversal system of column, facilitates to the operator the access to the husillo and to the piece. The use of guides with retenes and a bomb of oil lubricante, with optimum control of supply, achieves to reduce to 50% the oil of lubricación.
Regarding vertical centres presents the Genos M460-V descendant of the successful series MB-V, has husillo of high speed of 12.000 rpm and fast routes X/And: 40 Z:32 m/min. The characteristics of this centre turn it into an option hit for the mechanised of precision by his stability and speed.
Also presents the centre of taladrado and threaded of his represented Plough-Seiki, model S6040 with control Fanuc 0iMD, with a husillo of 12.000 rpm and 7,5 kW, some fast travel of X/And:36 Z:48 m/min and a warehouse of 24 tools. His characteristic turn him into an ideal centre for operations of taladrado and threaded.