Innovation in the manufacture of plastics
October 7, 2010
Amut: thermoforming and extrusion (Hall 16, stand D43)
Amut, one of the Spain represented by Protecnic 1967, sets out the new machine of thermoforming line, model AMP630-GP, with Tiltable bottom mold. This new model, especially suitable for the manufacture of conical articles, operates with a cast of 35 cavities for vessels of 200 CC cc and reaches more than 73,000 pieces productivity per hour.
ATF: packing and palletizing of coils (Hall 12, stand C26)
The Italian company ATF Automations, specializing in the automatic handling of coils, presents an installation for the packing and palletizing of rolls of TPO and another for PVC rolls. It has sufficient capacity to absorb, at the same time, the production of two different lines. The second novelty is a line of unloading, transport and palletizing for rolls of PVC for food packaging, which goes directly from the end of line winder to sunset in its corresponding pallet (provided that the weight of the coil does not exceed the 1200kg).
Bimec: cutting machines and rewinders (Hall 3, stand B06)
Bimec SRL presents its wide range of cutting machines - rewinders, groups of monoplegados and short tubes. Two cutting machines that will be on show at the booth will be the cutting rewinder Mod. STM/43.2-S and the Mod. TCA/64.C double turrets.
CMG-MAM: installation overfive to five layers coextrusion (Hall 17, stand C42)
The CMG-MAM company exposes its innovative line of co-extrusion five layers, Overfive. It is a high-performance installation type Innoex-M for the production of film coextruído of LDPE LLDPE with production capacity of 500 kg/h.
IPM: acampanado in line for PP and PE pipes (Hall 16, stand D58)
The Italian company IPM introduces a new range of produced completely automated online, for the formation of the produced of the tube by injection, directly on the double wall corrugated pipe. It is worth noting the versatility of this machine that can be acampanar both polyethylene and polypropylene, changing only the molds.
ITIB Machinery: corrugated tubes of large diameter (Hall 15, stand D37)
ITIB Machinery Company presents a prototype of a mold of his new corrugador F1200SH10, capable of producing tubes reinforcing with a maximum outer diameter of 1200mm. This machine will be equipped with ten pairs of molds and is an evolution of the model smaller F700SH9.
Previero: centrifuge of pre-washing for film (Hall 9, stand D41)
Following in the footsteps of the first successful model of WCE 3000, Previero presents the new centrifuge of pre-washing WCE 3000, developed to work in the most adverse conditions possible, as for example, with from thin film of the agricultural sector or to post consumption highly printed film.
Rotomachinery Group: Rotational moulding and large moulds (Hall 9, stand C22)
Rotomachinery Group continues promoting the two world premieres presented by the last fair Argenplas 2010: the anti-crisis for the Roto-molding machine and that works with large moulds completely automatically.
The new model of machine for rotational moulding CRM is characterized by having a new heating system, a new mechanism of opening/closing of the furnace and advanced sets of cart/arm carries mold.
With regard to the installation of Rock & Roll, it is the only market that allows the molding of large parts of fully automatically, with operations of opening of mold, material loading and extraction of the piece at the height of the operator.
Saldoflex: line for the manufacture of bags (Hall 9, booth F14)
The Italian company Saldoflex, specializing in the manufacture of bags l, exposes a complete installation called Rollflex, for the manufacture of bags and bags of Fund, with presplitting welding, for tearing, wound in rolls and encintados to three trackson the basis of a single coil.
Weima: modular system for grinding (Hall 9, stand A59)
The modular system of grinding that presents Weima comprises two modules, with the mechanism of court built around a number of measures and forms of blades rotor. Three additional pressure, depending on the material to be crushed systems are available as an option. This includes a horizontal slider to crush mazacotas, one with curved for film, and one diagonal processing hollow elements.