Rösler presents the latest in tire surface finish at BIEMH 2010
Wheels with bright finish mirror
The quality of the surface of the aluminum wheels finished standards, especially in regards to the luster, has increased significantly in recent years. This applies both to manufacturers of tires and for which recover them as well as tuning shops. The new system of vibration Rösler FBA 24 Turbo finish, creates a high-gloss, over mirror on the surface of new and used aluminum wheels as well as other pieces of automobile and motorcycle need a polished.
Now the mirror finishing of aluminium wheels is highly attractive to the eye. To achieve this appearance in all kinds of wheels, regardless of how complex their geometry may be, Rösler has developed the new system of rotating vibrator FBA 24 Turbo, to be presented at the fair. Compared with conventional double vibrating engine machines, the FBA 24 Turbo model increases performance up to 120%, with almost half processes times. In the model FBA 24 can reach a finish of highly glossy surface not only in tires, but also in other parts of vehicles, whether of aluminium, steel or stainless steel. The new finishing systems are equipped with sophisticated controls, as for example, allow the start of the process during the night without presence of the operator.
Compared with conventional dual-engine machines, the FBA 24 model, specially developed for the finish of wheels, increases performance up to 120%. The set of machine, composite and abrasive polishing and shining make possible this excellent performance.
Easy recovery of used tires
Regardless of the conditions of surface of used tires, the parameters of the process of pre-pulido, polished and shining in the FBA 24 Turbo can be prefixed so that it ensures the desired highly glossy surface finish. Robust vibrating motor, due to its variable speed of rotation, can be adapted to any work with virtually any geometry of the tires that are available in the market.
Complete package Rösler
Rösler not only offer equipment to better performance, but it also offers consumables polishing and shining as well as compounds developed and manufactured by them. These products have been designed so that they reach a high-performance considering also the environment. For example, its compounds allow recycling of process water, as which not only is respectful with the environment, but that also involves considerable cost savings.
Finishes of first class for the manufacture of tires in large volumes
For new tires manufactured in large volumes, the 24 FBA is exclusively used for the process of polishing thin and polished. The previous pre-pulido of the wheels is performed in the finishing system Plunge patented by Rösler, (usually in 30-50 minutes)
Rösler offers the possibility of testing with the 24 FBA in its facilities. In addition, Rösler can also offer solutions for large 24-inch wheels.