This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Tornos lleva lo último en mecanizado de precisión a la Emo 2009

Ver más artículos sobre: Emo Milano 2009

Hall 2, stand F8

Lathes brings the ultimate in precision machining to the Emo 2009

Drafting MU08/09/2009

September 8, 2009

Lathes will not miss the Italian event of the 2009 Emo. Deco CNC lathes 10e of tailstock and Deco 20 to the CNC lathe multiejes that allows the complete finishing of more complex pieces, will be one of the machines exhibited at the stand of the company. Also highlight the lathes single Delta CNC for the profitable production of simple pieces and the Chucker MultiSigma, referred to the work piece by piece. The drugstore, belonging to the Tornos group company brand, it should be noted the presence of the CU 1007, a high precision machining center and the versatile milling of bars FB 1005.

The Deco 10e can turning, poligonar, milling, torbellinar, carve gears, as well as all the operations carried out traditionally in Tornos machines.

Lathes presents a wide range of teams prepared to meet all the needs of machining by chip in CNC machines boot, either with a lathe of mobile or fixed head, single or multihusillo CNC of up to 8 spindles and 2 contrahusillos, or for work from piece to piece, in mode 'chucker' or bar.

All the versatility of the Deco family

With a step of 10 mm, lathe tailstock Deco CNC bar 10e is the ideal machine for cost-effective machining and precision of parts for the sectors medical, watchmaker, electronic, among others. Its ease of preparation responds to the needs of all kinds of workshops and its kinematics allows you to ensure a high productivity. This range includes the complete machining of complex parts, thanks to its independent Sub-spindle and a significant number of fixed and rotating tools against operation, which ensure the rear machining time shifted. These machines can be turning, poligonar, milling, torbellinar, carve gears, as well as all the operations carried out traditionally in machines Tornos, eliminating the need for costly second operations.

The Deco 20a is the ideal machine for complete machining and second parts of the orthopaedic and traumatological sector operations.

For its part, the model Deco 20a is the ideal machine for the complete machining without second parts of the orthopaedic and traumatological sector operations, such as screws of all kinds bone, joint and applications for the surgery of lumbar and cervical (Spine)including the parts relating to the replacement of cervical disks, orthopedic pins, as well as other items dedicated to surgery, instrumentation, dental turbines, etc.

The Sub-spindle with dish of three claws that can incorporate these machines allow a mooring with a higher. This system is ideal for the machining of Orthopedic and other similar pieces, by allowing further optimization of the mooring force to perform the machining against operation depending on the geometry of this kind of piece.

The Delta range consists of six machines of 3, 4 and 5 axes, for capacities of 12 and 20 mm step bar.

Delta and MultiSigma Chucker: CNC lathes for cost-effective production

Thanks to the Delta range, precision machining market has at its disposal a CNC lathe for production, which allow producing simple parts with the best return on investment. This range consists of six machines of 3, 4 and 5 axes, for capacities of 12 and 20 mm of shift from bar and they have been placed on the market by lathes at prices that defy any competition. The strengths of these machines are above all, its simplicity and ease of preparation, as well as the fact of benefit and share all the benefits of the products of the Swiss manufacturer, such as quality, ergonomics and accuracy, as well as a very attractive price.

The Chucker MultiSigma comes ready to work with dishes to machined forged, stamped parts, etc.

With the multihusillo of 8 spindles completely CNC, MultiSigma Chucker has the same technical characteristics as the MultiSigma 8 x 24. This machine comes ready to work with dishes to machined forged, stamped parts, etc. One of the advantages of this system of dishes is offered a less demanding than the mooring berth by clamp (tolerances and surface State). The feeding of the parts can be done through a vibrator, by means of a robot or another system, which would be defined with the client. This concept of work piece by piece, also can be adapted in the range MultiAlpha and Multisigma of lathes, and can be completed with a controlled output of pieces system, including Palatalization of the same.

The drugstore CU 1007 machining center is indicated for parts intended for sectors such as medicine, aeronautics, watches, micromecánica, etc.

Machinery drugstore at the EMO exhibition

CU 1007 of drugstore is a center of 3 to 5 axes, for the manufacture of very complex parts and that require the highest precision (medicine, aeronautics, watches, micromecánica, etc.). This machine comes standard with a dash of tools of 30 positions, integrated motors and incremental rules of 1/10 µ, in the X/Y/Z axis. The machine can come with a complementary team, which will increase its broad set of capabilities.

For its part, the FB 1005 bars of drugstore CNC milling, is a modular and versatile for all types of applications: medical and dental, watches, electronics, jewelry, aeronautics, etc. In all these sectors related to the latest technology, the FB 1005 guarantees complete milling from bars, with the highest precision.The drugstore CNC milling machines are very high production machines, thanks to their 3-6 axis CNC simultaneously, and can incorporate a number of additional and peripheral modules.