This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Universal CNC, en la Biemh 2008Pavilion 2 Stand D-19 •
Universal CNC in the Biemh 2008
February 21, 2008
In this Edition, for the first time are set out in a fair Makino machines together with
Universal cnc. One of the leaders in the sector of the mold and matrix displays in this edition the heart of mechanized vertical model S56 which will be added to the wide range of machines and beginnings of the Enshu, Victor, Takizawa, Fuji or Akira Seiki brands, the new represented.
Centre of machined horizontal ultra-fast Enshu JE-80S
Enshu (Japanese company in the machining of automotive sector) will be represented with the heart of machined horizontal ultra-fast model JE-80 S that stands out as the most productive machine that is currently marketed in the European market.
Victor Vc-205 of fixed table and mobile column machining center
His represented Victor (Taiwan) on display in this edition of the fair Vc-205 vertical machining center. This machine is characterized by being able to work using all of the table for large dimnesiones parts, or in tilting mode in such a way that 2 independent areas of work are thus available.
Double pallet Akira Seiki A-650 vertical machining center
Your new represented Akira Seiki is presented as novelty in Spain. This edition presents the double vertical machining center rotary pallet model A-650, which features double worktable 650 x 350 mm (with a change of 2.5 s. for 180 °), with tours in shafts/y/z 650 x 350 x 400 mm, head of direct coupling with a motor 11 kW (15 Hp) at 15,000 rpm with taper HSK 63A, rapid displacement of 96 m/min in x/z axes and 48 m/min on the shaft and with some acceleration of 1.2 G. Tool magazine capacity is 24-position with a change of 1 tool, 2\1s\2
Makino S56 vertical machining center
For the first time are set out in a fair Makino machines together with Universal CNC. One of the leaders in the sector of the mold and matrix displays in this edition the heart of mechanized vertical model S56 which by its type of construction, head and numerical control unit allow exceptional finishes in minimum times of moulds, dies, prototypes, etc. Its main features are: tours in axis X/Y/Z of 900 x 500 x 450 mm in a table of 1000 x 500 mm. Its head of 22 kW (30 Hp) has a twist of 12,000 rpm (20,000 rpm opcionamente). The capacity of the storage of tools is 20 units.
Makino horizontal machining center a81M
In the case of horizontal Makino machines model a81M which is intended to the sector of medium/large pieces that need a machine with a great power of chip startup is exposed.
This is possible thanks, mainly, to a bench designed in line with a powerful head (patented system) with cone HSK-A100 at 8,000 rpm, a power 37 kW (50 Hp) and with an impressive torque of 1,009 commas. The main data are: routes X/Y/Z axes of 900x800x1.020 mm. with double pallet of 630 x 630 mm allowing a swing of diameter and height of 1,000 x 1,300 mm.
Torno Takizawa TT-200 cm (dual-head with loading and automatic download)
As usual for CNC Universal returns to expose the latest version of the model of loading and automatic unloading more installed in the market.
The model TT - 200 cm is composed of 2 heads with plate of 200 mm and a power of 15 kW (20 Hp), Coil turning auto parts, 1 manipulator of pieces for the 2 heads, 1 station of pallets of 16 units with 450 mm in height each.
Winches with loading and unloading automatic Takizawa TC-100 G
This machine of its represented Takizawa is the smallest model with manipulator of loading and unloading of parts. It excels by the rapidity of their movements and the minimum cycle of machining allows. Its main features of the handle are: maximum diameter to machine of 100 mm, maximum length to machining of 60 mm, 14 stations of pallet with 450 mm in height each.
Surrounding Victor Vturn - 26
In this edition of the show is presented for the first time the new model of lathe Vturn - A26 of the represented Victor. The main features of this lathe are: head integrated without straps with lubrication system for closed-circuit of oil; rectangular guides in the 2-axle; Ø on table 670 mm; Ø maximum machining 420 mm; maximum length to mechanise 850 mm; power main engine 15 kW (20 Hp); turret 12 positions. It is complemented by: Fanuc Oi control with color screen and "Manual Guide", shavings and taladrina at high pressure pump.
Line for machining of Fuji consisting of the ANW-35 lathe and milling HM-34 T unit
The company presents a line/cell of turning and milling Fuji. This Japanese company devotes to the manufacture of lathes (horizontal and vertical) with systems of manipulation integrated cheese cheese, well are manipuladores or robots. His machines allow to work with diameters of pieces until 400 mm or with axles until 400 mm. Of length.
Have of special applications stops: differential boxes, rings of threads, trees of levy, etc. The line of mechanised that it presents in this edition consists of lathe ANW-35 and the unit of milling HM-34T.
Ares Seiko R4530 vertical machining center
For the first time occurs in the stand of Universal CNC model of brand Ares Seiki, company dedicated to the exclusive manufacture of vertical machining centers of drilling and threading with BT-30 and BT-40 cones. The Ares Seiki models may be a desk or with changing rotating pallet. All of their models stand out for the high precision and reliability, as well as the high-tech manufacturing getting machines highly advanced features such as the rapid displacement, the robot of their heads, etc.
Center of turning
Takizawa TMM-250 model 1
On this occasion is exhibited a model of best-selling: the Centre of turning Takizawa TMM-250 module 1 whose configuration: motorized top turret of 15 positions with axes X, Z, and and; motorized lower turret of 15 positions with axes X, Z; both heads with integrated motor and axle C. Two turrets can work both of them together or separately in any of the heads.