Soraluce S. coop., at Biemh 2008
February 21, 2008
Centres of milling table fixed model T-25-A
Features:
- Longitudinal course "X axis": 2,500 mm
- Vertical course "axis and": 1, 250 mm
- Cross current "Z axis": 1,000 mm
- Dimensions of the table: 2,700 x 850 mm
- Advances fast axes X, Y, Z: 25,000 mm/min
- Progress of work axes X, Y, Z: 10-10.000 mm/min
- Automatic indexing head of 2.5 ° x 2, 5 / 24 kW / 479 Nm / 4000 rpm.
- Cooling of the piece through the tool.
- Numerical control: Heidenhain iTNC 530
- Flying electronic Heidenhain HR-410
- Digital drives C.A.
- Electronic clearing of dilatation in the RAM / head.
- Rules of direct uptake of all the axes.
- Hydraulic counterweight to the vertical movement.
- Centralized automatic lubrication.
- Ready to integrate storage of tools for 20, 30 or 40 tools.
- Full fairing according to Directive 98/37/EC European
Centres of milling of mobile column on table fixed model SP-8000
The centres of milling table fixed T-25-A model are ideal for users who require great flexibility, as well as a large capacity of chip startup
Features:
- Longitudinal course "X axis": 6500 mm
- Vertical course "axis and": 2,000 mm
- Cross current "Z axis": 1,500 mm
- Table dimensions: 8000 x 1,100 mm
- Advances fast axes X, Y, Z: 25. 000 mm/min
- Progress of work axes X, Y, Z: 10-10.000 mm/min
- Automatic indexing head of 2.5 ° x 2, 5 / 30 kW / 1,140 Nm / 6,000 rpm.
- Numerical control Heidenhain iTNC-530
- Flying electronic Heidenhain HR-410
- Digital drives C.A.
- Electronic clearing of dilatation in the RAM / head.
- Rules of direct uptake of all the axes.
- Hydraulic counterweight to the vertical movement.
- Refrigerated cabinet.
- Centralized automatic lubrication.
- Storage of tools for 60 tools.
- Tools changer powered and powered by servo motors controlled by CNC with change in vertical or horizontal position.
- Full fairing according to European directive
Milling the SP series SoraluceE centres, can be equipped with various types of Heads of 3,000 to 6,000 rpm
Milling-bore Center mobile amount model FX24000
The characteristics of the centres of milling mobile amount of the F series, place these machines in the most flexible of the market for the machining of large parts in a single subject, and can perform roughing, semi-finishing and finishing operations, with a considerable cost savings for our customers
Features:
- Longitudinal course "X axis": 24,000 mm
- Vertical course "axis and": 5,300 mm
- Cross current "Z axis": 1,600 mm
- Advances fast axes X, Y, Z: 25. 000 mm/min
- Progress of work axes X, Y, Z: 10-10.000 mm/min
- Automatic indexing head of 2.5 ° x 2, 5 / 37 kW / 1,140 Nm / 5,000 rpm.
- Numerical control Heidenhain iTNC-530
- Flying electronic Heidenhain HR-410
- Digital drives C.A.
- Electronic clearing of dilatation in the RAM / head.
- Rules of direct uptake of all the axes.
- Hydraulic counterweight to the vertical movement.
- Refrigerated cabinet.
- Centralized automatic lubrication.
- Storage of tools for 60 tools.
- Tools changer powered and powered by servo motors controlled by CNC with change of piece vertically or horizontally.
- Total protection according to EU directive.