Pavilion 4 • Stand A-72

SCHUNK Intec shows in the biennial four products: the modular system Gemotec new plate for lathe NCK-Plus, the tool of great Sino-R and Tandem mooring stationary 85 unamordaza. force 000N.

Gemotec is a modular system fast, robust and rigid. With few components of this system you get to perform a wide variety of automated solutions. A complete range of pneumatic and electrical modules that open up a myriad of possible combinations. The system is characterized by its flexibility and its high technical performance. Linear motors allow you to schedule up to 256 positions throughout the entire race. Regardless of whether you want to use the axis in vertical or horizontal, the top race is 260 mm. The system is so flexible and simple that with exactly the same components are fixed several applications. Therefore builds a flexibility and maximum security of investment for the future. In a short time the system is adapted to new demands and new applications.

With the software Gemotec Toolbox you can easily calculate loads and cycle times of a component or complete systems, with an added plus: a click with the mouse and you already have the complete list of all the components and auxiliary materials.

Program is free to download from their website www.gemotec.com

Dishes for lathe Schunk NCK-Plus are convincing because of its excellent quality, which is based on innovative technology and the experience of more than 30 years. Standard uses both for special applications, Schunk offers the best alternative at the best price. The development of technology and best tools, as well as the implementation of systems of quality DIN EN ISO 9001, make Schunk his best Advisor of dishes for lathe of high quality.

These are the advantages that it offers the dish Schunk NCK-Plus: support 1: 1 with the Kitagawa B-200 dishes; excellent strength of mooring thanks to the proven system of hook and wedge; wide passage of bar. You can machine all the most common diameters; a single piece, and robust casing which guarantees a high rigidity and a perfect finish; claws base with toothed 1.5 mm x 60 ° and 1/16 "x 90 ° series; adapter for the strained; easy to use; excellent quality/price ratio.

NCK-Plus, the new dish for Schunk lathe

The universal tool Sino-R of Schunk is based on the innovative technology of expansion, through an elastomer pressure inside. As the shirt of subject is pressed axially with the key, the elastomer is forced against the wall of the shirt. The force expands uniformly in the direction of the central axis of the tool and provides a mooring with great strength of tightening, which makes this tool into the perfect tool for roughing.

The system provides the following features: up 850 Nm in force of torque; reinforced body to provide the tool of greater rigidity; very easy to use; versatility thanks to the range of intermediate bushes; concentricidad of 0.005 mm; adjustment of the length of the tool; absorption of vibrations by elastomers.

Parts can be set with the stationary pneumatic or hydraulic clamp of Schunk for machining with a maximum of 85,000 N force and a guaranteed repeatability of 0.01 mm. The feeding of the clamp can be down or the side. It is available with sizes of 110, 170, 250 with single or double piston pneumatic versions.

All Schunk gripper can be combined with the fixation Unilock system point zero, allowing considerable savings in the preparation and an increase in the profitability of their machines.

The Tandem gag won the award for excellence in design and features.