This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Maquinser, en la Biemh 2008Pavilion 3 Stand D-44 • / E-43
Maquinser, in the Biemh 2008
February 19, 2008
Maquinser shows in Hall 3, stand D44-E43 four centres of turning their brands Biglia, Matsuura, Muratec, and You. The models that we see are as follows: Centre of turning Biglia B 470 YSM, multitasking-Matsuura Cublex-25V PC10 vertical machining center, the center of turning vertical and high-speed Muratec MD 120 G, the Centre of vertical turning You JI YV 1600 ATC + C.
Center of turning Biglia B 470 YSM
It's a turning European Center which offers an excellent combination of double screw and double turret for simultaneous machining, both front as laterally, without risk of collision and in record time.
The actual diameter of machining is 40 mm and the length of 250 mm, with C axis and, and and 12 motorized tools.
Centre of mechanized vertical multitasking Matsuura Cublex-25V PC10
Matsuura has developed Cublex from a new concept of centre of mechanized vertical multitasking, with 5 continuous axes with integrated process of milling, turning and grinding. Its high efficiency in these processes and the high quality and precision of machining allows you to work complex components thereby creating high value added in components with a single mooring.
The machining center can work pieces up to 40 kg and reaching a volume of machining of 250 mm in diameter to 15,000 rpm. Their advance is 50 m/min consists of 10 pallets changer and 40 tools changer.
Center of turning vertical and high-speed Muratec MD 120 G
The series centres MD of turning high v and l or c i d to d, MD 100, MD 120 and MD 200, Muratec offers a new concept in integration of turning, drilling, threading and machining. Compact design and easy start to point to a rapid and flexible production in stockings and long series.
Dual front turrets motorcades in all positions head.
The machining center can work pieces up to 120 mm in diameter and 80 mm in length. Loading and unloading is robotic.
Matsuura has developed Cublex from a new concept of multitasking vertical machining center
Vertical turning You JI YV 1600 Centre ATC + C
Number one in vertical lathes in Taiwan, this manufacturer offers 20 different models with or without shaft C and motorized tools.
Special for wheels machining lines. The structures are of high rigidity and stability. It has bearings timken precision and maximum efficiency ZF gearbox.
It has a capacity for pieces between 400 and 4800mm in diameter with heights of 250 to 2,000 mm and there is the possibility of incorporating ATC up to 60 tools, APC, double ram, counterpoint... the perfect ally for special parts of the wind and aeronautical sector.
The model 1600 YV ATC + C, has 16 tools changer and C axis.
With real machining of Ø 1,800 and H 1,200 mm.
Related Companies or Entities
