This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Loire Safe, en la Biemh 2008Pavilion 5 Stand B-58 •
Loire Safe, in the Biemh 2008
February 19, 2008
Loire Safe is present at the fair to display two of their machines: the hydraulic shear Loire type CHVt-84 (8 mm x 4,050 mm) and the folding hydraulic with electronic synchronization LOIRE type PHSE-125/40 (125 t x 4,050 mm). The signing broke a record in 2007: awarded to a company in the Basque country the higher folder in Spain of 1,500 tons of force and 12,500 mm length for bending of plates of very thick in a single operation.
Type CHVt-84 Loire hydraulic shear (8 mm x 4,050 mm)
The shear featuring Loire in the 25BIEMH is CHVt series, has a cutting capacity of 8 mm in thickness and 4,050 mm long, with a special device of clamping of thin sheet accompanying the sheet for the Court to prevent sagging of the same. The machines of this series are built on a very rigid unibody chassis and are integrated in the frame table. All the maneuvers of the machine are made through a programmable PLC Omron. It has reflectors security, lighting of the cutting line, balls in table for sliding of the sheet, regulation of the separation of the blades, the corner of court and the long. of court.
Folding hydraulic with electronic synchronization Loire type PHSE-125/40 (125 t x 4,050 mm)
Loire Safe delivered in 2007 to a company in the Basque country the higher folder in Spain of 1,500 tons of force and 12,500 mm length for bending of plates of very thick in a single operation.
In recent years Loire Safe has specialized in the manufacture of presses and installations for stamping hot sheet
Hydraulic presses
In recent years Loire Safe has specialized in the manufacture of presses and installations for stamping hot sheet. The pieces usually made by this process are: door reinforcements, bumpers, reinforcements of stanchions, floor Central reinforcements. Pieces of high resistance in general. The company presents the latest applied for this kind of work.