This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Automatización de Prensas Lara, en la Biemh 2008
Pavilion 3 Stand F-43 (booth Delteco) •
Pavilion 3 Stand E-58 (Redima group stand) •
Automation of presses Lara, in the Biemh 2008
Drafting MU19/02/2008
February 19, 2008
The firm unveils at the booth of the BIEMH its 'lc' range with low-cost products. Aware of the new trends, they have achieved introduce simpler manufacturing systems based on new mechanical designs and the use of drives and less sophisticated electronic control elements, allowing them to maintain the same performance and quality at a very contained price. In this way, can offer companies the possibility of making disbursements in what really are to be used, neither more nor less, eliminating functions and unnecessary and therefore sophistication, significantly lowering the level of investment required. In the same exhibition, Lara is also present with its products at the stand of its partners Delteco (Pavilion 3, stand F43) and group Redima (stand E58).
On this occasion, the greasing of band Raziol of last generation systems, as well as well-known feeders tyres of precision, mark IGOL, you can see the developments outlined below:
- Electronic ballasts 'low-cost': you have AE-0/210-LC and AE-2/450-LC models with a section of power of 210 (210 x 1 mm) and 900 (450 x 2 mm)2 mm respectively. The 'lc' range incorporates a mechanics of optimized power, electronic control of position of new generation and a new planning unit with touchscreen in colour and simplified operating functions.
Electronic feeder roller AE-0/110-LC-SERIES.
- Compact lines 'low cost' for unwinding, straightening and feeding into a single unit, Demae-1000/46/200 and DEMAE-3000/61/450 models. Both lines are presented on a common frame, with all the elements necessary to provide, from a desk centralized dashboard, handling operations and new strips, as arm pneumatic pisador, automatic system of introduction of the first Speyer, height adjustment of the head straightening and feeding, and walled perimeter side and rear.
In the first case, the line is composed of devanadora with a capacity up to 1000 kg, mechanical expansion and drive variable speed with adjustment by potentiometer, and an enderezador-alimentador compact for strapping of 450 mm section2 (200 x 2.2 mm).
Representation compact line of feeding DEMAE-1000/46/200-LC SERIES.
The second line has a devanadora with capacity up to 3000 kg, mechanical expansion and drive variable speed with adjustment by potentiometer, and an enderezador-alimentador compact for strapping of 900 mm section2 (450 x 2 mm).
Related Companies or Entities
Lara - Automatizacion de Prensas, S.L.
