This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Intermaher, en la Biemh 2008

Pavilion 3 stand F-24 • / G-23

Intermaher, in the Biemh 2008

Drafting MU18/02/2008

February 18, 2008

Intermaher, as she is normally the case, it will show machines of high-tech manufacturer Mazak, with models QTN - 350 M/1500, QTN - 100 M II, Integrex 200 4th ST, horizontal machining centres HCN5000 and HCN 8800 and Variaxis 630 T.

QTN - 350 M/1500

QTN - 350 M/1500, machine has the following characteristics: hydraulic plate of 12 "
Fast forward of the axis X = 30 m, z = 33 m
Maximum cutting diameter 420 mm, swing over table 750 mm
Head turning 40 HP & 3300 RPM
Motorized tool of 10 HP and 4000 RPM
Programmable CNC counterpoint with independent servomotor
Passage of bar diameter 102 mm and be 1538 mm maximum length

QTN - 100 M II

With regard to the model QTN - 100 M II, stands out for its hydraulic plate of 6 "and the rapid advance of the axis X = 30, Z axis = 33. Its maximum diameter of cutting is 280 mm, and the flip on bed of 550 mm. Other features are:
Head turning 15 HP & 6000 RPM
Motorized tool of 7.5 HP and 4500 RPM
Programmable CNC counterpoint with independent servomotor
Bar diameter 51 mm step
Maximum length be 334 mm.

Integrex 200 4th ST

Integrex machines there's never the appointment. In this case presents an Integrex 200 4th ST, which has a hydraulic plate 8 "in both heads. In addition, characterized by:
Fast forward X - Z = 38 m/min., Y = 26 m/min.
Maximum diameter of cutting 260 mm, swing over table 660 mm.
Power head 1 = 30 HP & 5000 RPM; head 2 = 25 HP & 5000 RPM
Milling head 25 HP & 12000 RPM
Passage of bar diameter 65 mm
40 Tools store
Maximum length be 995 mm

HCN5000

HCN5000 is a horizontal machining center ISO 40 & DIN 69871 with head 40 HP & 18000 rpm and pallet 500 x 500.
Volume of piece, diameter 800 x 1000 height
Store 40 tools
Change of tool chip to chip: 2, 7 "
Fast forward X-and-Z: 60 m/min.
Acceleration: 0.8 g.

HCN8800 horizontal machining center.

HCN 8800

The 8800 HCN is also a horizontal machining center ISO 50 & DIN 69871, in this case with head 50 HP & 10000 rpm and 800 x 800 pallet.
Volume of piece, diameter 1450 x 1450 height
Store 60 tools.
Change tool chip to chip 5 "
Fast forward X-and-Z: 60 m/min
0.5 G acceleration

Variaxis 630 T

Machining Center for 5-axis, ISO 40 & DIN 69871 Variaxis 630 T model, is equipped with a table of 630 mm in diameter and prepared for a volume of piece, 730 in diameter x height 500.
Power head 40HP & 18000 r.p.m
40 Tools store.
Move fast X-and-Z: 52 m/min.
Table mode winches 1100 RPM