This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Goratu Máquinas-Herramienta, S.A., en la Biemh 2008Pavilion 3 Stand E-06 • / F-05
Goratu machine tool, S.A., in the Biemh 2008
February 16, 2008
Goratu sets out in its stand in Hall 3 / E06 - F05, two horizontal lathes Gemini model GHT 5 G4 1000 X 4 m and GHT 11 G4 2000 X 6 m, the milling machines with table fixed Lagun and mobile table model G Nova 41 presenting with a removal of chips and a fairing perimeter to cover equipment around the area of work. It also shows the milling machine Lagun of mobile column and fixed table, model GBM CM 4 and transverse mobile amount, model G Master MMT 3 RT.
Gemini Horizontal lathe, model GHT 5 G4 1000 X 4 m
It's a lathe with a party of 4 guides (G4) architecture to avoid interference of the cart with counterpoint and lunettes, a swing of 1,000 mm and distance between points of 4 m. It is equipped with Siemens 840 D control and automatic turret of 4 seasons.
Gemini Horizontal lathe, model GHT 11 G4 2000 X 6 m
This model of large lathe is designed for turning heavy pieces, which complemented the large capacity boot available chip with high levels of precision, rigidity and reliability. Mainly intended for the paper, wind and oil sectors, steel etc.
With a flip on bed of 2000 mm and distance between points of 6 m, it can support parts of up to 35 t between points. Equipped with a 130 kW engine, you get a maximum torque of 124,000 Nm.
It is equipped with a control Fanuc 18iT, automatic turret of 4 stations and counterpoint with motorized displacement, both cane and the body and automatic swing to the bench.
GBM CM8
Milling machine Lagun of fixed bed and mobile table, model G NOVA 41
The line of high-performance milling machines with bench fixed Lagun is represented by this model "G 41 courses X = 4000 mm, Nova Y = 1200 mm and Z = 1500 mm."
Built with guidance in raceways with Rails and skate size 45 RUE and a precise sizing of the spindles to balls and drives in each axis, this range of milling machines get high speeds and accelerations of displacement benefitsas well as optimum qualities of precision.
This machine occurs in Bilbao with an equipment for extraction of chips and a fairing perimeter to cover all the work area.
GHT 11 64
Milling machine Lagun of mobile column and fixed table, model GBM CM 4
This product line allows to approach the mechanization of parts of up to 10 meters in length without that virtually any limitations under the weight of the piece, being all carro-columna that performs longitudinal displacement. On the other hand, it also allows the pendulum work; You can have two separate areas of work. This allows the machine to work in an area while the operator performs the work of preparation of the next piece in e another area.
The machine presented at the 25 Biemh has some courses of X = 4000 mm = 1200 mm and Z = 1500 mm. Equipped with control Heidenhain iTNC-530, automatic header in the 2 bodies with cooling internal shaft and a warehouse of tools of string in the column.
GHT 5 64
Milling machine Lagun of transverse mobile amount, model G Master MMT 3 RT
GMASTER MMT 3RT
Models of Transversal Lagun mobile upright milling with fixed bench and mobile table or table rototraslante are intended for machining of parts of large volume and high accuracy requirements.
This architecture of manufacturing allows machining of various levels of the piece in a single bound. The milling machine G Master MMT 3 RT that occurs in Bilbao has some courses of X = 3000 mm; And = 1000 mm, Z = 1500 mm and V = 1000 mm. It is equipped with an automatic head and rotary table and traslante of 1200 x 1500 mm with a payload of 10 t.
GNOVA 41
Related Companies or Entities
Goratu Máquinas-Herramienta, S.A.
