This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Fidia, en la Biemh 2008

Ver más artículos sobre: March 2008, date key for the machine tool sector

Pavilion 3 Stand F-40/G-39 •

Fidia at the Biemh 2008

Drafting MU15/02/2008

February 15, 2008

Fidia introduces important new features in its line of products that are present in the BIEMH. Integration is the key factor that defines them. Flexible and compact at less cost, with these features is the new line of Fidia controls with a flexible hardware for medium and high performance.

Milling of high speed

Fidia consolidates its presence in the market of machine-tool by proposing new ranges of high-speed and high-performance machines.

Of the Gantry type with high crossbar mobile and table fixed, as well as gantry, mobile table result of experience gained in more than 15 years of activity in the design and manufacture of solutions dedicated in high-speed milling machines.

Gantry type machines and Portico, 3 and 5 axes are to increase the field of work considerably allowing more applications, such as the matrices for bodywork, models of style and large structures in the aerospace industry.

In particular, models of type portico will complete the range for more traditional applications: machined roughing or materials very hard, as alloys of steel and titanium, typical of the aviation industry and energy.

Complete the range machine Fidia PV6060/17 ideal for molds for injection molding, to opportunely equipped also serves for machining of medium and large pallets of turbine allowing face a new and interesting type of application

G996RT

A base of 16 tons of cast iron machined after appropriate stabilization, a powerful electromandrino cartridge of 60 kW and up to 24,000 rpm, and the use of engine torque in the roto-basculantes tables, ensure high-performance operations from roughing in 3 axes and excellent finishes in complex parts of automotive and aeronautic 5-axis and a single tie.

The self-supporting structure of the Gantry of high bridge and fixed table type allows a continued support of the mobile group crossbar/RAM throughout its route on widely outsized guides by rolling.

Controls. The new line of C0 and F0 more flexible and compact numerical controls.

K199

They are systems of milling with five or six simultaneous axes. They represent the ideal solution for the machining in the aerospace industry and very complex prototypes. KRV version integrates a rotating table mounted on a shaft linear allowing the maximum accessibility to parts up to Ø 2200 mm.

Numerical controls

With these features is the new line of Fidia controls with a flexible hardware for medium and high performance.

Depending on the hardware you get the desired configuration: C0 with Windows operating system for applications for milling of molds and aeronautical pieces or F0 with Linux operating system for the general mechanical sector, grinding and drilled deep.

This new series controls manage Xpower digital drives and peripherals I/O Lux Fidia.

The measuring head system is available in different sizes to adapt to the different configurations.

Respecting always facilitated using user friendly that characterizes the Fidia range, the controls have a monitor 15-inch touch screen installed in the keypad.

Among the new hardware, to be presented the new CPU7 and CPU8 cards with processor 8245 that equate the latest generation CNC.

The passage of 250 to 400 MHz processor clock can increase the frequency of cycle (loop) control of the axes (of 500 average Hz to 1 kHz) to obtain benefits in terms of frequency of execution of the PLC with respect to the current CPU5 in classic conditions; Finally, use the software's Look Ahead V3, being more sophisticated, requiring greater computing power.

Approximating the paths tool with polinominales curves, allows to reach the best compromise between the contrasting requirements of precision, surface quality and time of execution ensuring a marked increase in productivity.

XPower digital drives. The range of drives Xpower is further enriched with new modules.

It has redesigned compacting the drive for the values of rated current for 60th and 80th now available from 150 mm.

The device Head Measuring System (HMS), the system for the measurement and compensation of bi-rotativos heads nutator, continuous or indexed, or roto-basculantes tables has also been subjected to restyling.

The HMS device is a very useful tool for who want to calibrate a head or a table, as builders of machines or retrofitadores.

In addition, with the great ease of use, it is also of great interest to the users of the machines, in order to undergo periodic controls of precision machines.