Treat the surfaces with care
Thanks to a very improved technique not originating any remarkable heat into the slot, so it does not require compressed air for the dissipation of the same. Also avoid additional costs for the no-utilización of external systems, as well as the inconvenience caused by the dust to operators and their environment.
Comfort of use and features
The menu shows the digital indication of time of work, the number of revolutions, their intervals, frequency of elevation and remaining processing time.
Polishing materials not deadlock or deform the turntable, avoiding in this way the interruption of the work process and the additional costs of repairs. In addition the CF incorporates security such as termointerruptores and current-limiting systems.
The peculiarity of the system offers customer the possibility of adapting it to each product and quality with the guarantee offered by the Otec, expert in systems of polishing system.
With the CF system, significantly increases resistance to wear and tear, allowing you to work with the products and granules necessary to obtain definitive results.
The use of abrasive agents of high quality and the application of material polishing with fine granulation, makes it unnecessary in many cases the process of Hoover.
There are programs of grinding or polishing of automatic execution controlled by processors with special traction of the plate to minimize heat. Getting that way an optimum quality of treatment even to a high number of revolutions, as well as very reduced process times.
The CF function virtually no noise or vibration. The caution with which the pieces are treated is possible thanks to the streamlined shape of the container and its size. The quality of the treatment is high and uniform due to an optimum flow of material and parts in Polish.
Some features are:
- Revestimiento inner of the containers in PU fimbriated, térmicamente reticulado and resistant to the wear (alloy of special steel in the processes in humid). With an adjust of high precision for the dish, that to his time possesses a ceramic system resistant raincoat to the corrosion (system patented).
- Frame of the machine realised with a modern frame of light metal. Motors of high propulsion with switches of protection.
- Control of process by means of SPS with indication LCD digital of time of treatment, rotation of the dish, dosage of the material of polishing, deceleración of the start, interruption of process and hours of service.
- Regulation of the parameters of time and rotation of the dish by means of a potentiometer and a converter of frequency.
The security of the process is guaranteed to avoid the jam or deformation of the turntable for polishing materials. Avoiding thereby the interruption of the process and the additional costs of repairs.
The quality of the treatment is assured with the caution with which dealt with the parts, thanks to the streamlined shape and size of the container and the correct flow of material and parts to Polish.
Sectors of application
The ability to work with pieces of very small size or careful treatment because of its fragility are typical characteristics of the CF.
Parts stamped, avoiding entanglements between pieces to form during the process, significantly reducing process times and improving the quality of their finishes.
Bearing or ball in miniature, with high quality results after the erosion of the surface and precise removal of microscopic burrs. Process times would be 90 minutes.
Other potential users are in the textile industry, the dental industry, the optical sector, the technician / surgical, pharmaceutical laboratories, the sector of watchmaking, manufacture of pens and fountain pens or piercings.