This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Prensas para embutición y chapa oxicortadaPresses for drawing and plate oxicortada
Hidrogarne is dedicated to the manufacture of hydraulic presses of the TJF-Garnet brand that has developed a standard range of 31 models. This range should join the capacity to build special presses appropriate to the special needs of each client. This article contains some samples of the standard range. Specifically one designed for stamping and drawing and the other for straightening plate oxicortada.
The Hidrogarne signing - in the Spanish market from 1987 - has facilities of more than 2,400 square metres in the Lleida town of Castellnou Seana. They involved an area of 1,200 square meters in the production of, among other things, hydraulic presses of the TJF-Garnet brand. It also has an area of research and development and an exhibition of 400 and 800 respectively square meters area.
Press for deep drawing
The hydraulic press model RVC 150 E, of the JF-Garnet Hidrogarne brand, is especially recommended for stamping and drawing work.
The standard team consists of a cylinder of double effect of 150 tonnes, with a run of 500 mm, chromium-plated piston and guides wear of high speed. The hydraulic group - at the top of the press - is motorized and consists of two-speed with automatic disconnection and drive by valves. It includes antirretorno valves, limiting valve for pressure prellenada valve, prevent valve and decompression of the cylinder system.
The electrical installation of operation is activated manually and automatically, and has a selector to act with 1 or 2 speeds, as well as a drive by push button two-handed and automatic disconnection of the speed of approach. The route of the cylinder can be regulated and the change in velocity is carried out through end of career.
Straighten sheet metal
Another press developed by Hidrogarna is the hydraulic press model LRD 500 E of TJF Garnet, which is especially recommended for the straightening of plate oxicortada.
This is a structure press monobloc cylinder of double effect and motorized displacement of the head. It has a hydraulic group of two-speed with automatic disconnection of the fast speed, equipped with decompression system. It is equipped with maneuver at low voltage by means of pushbutton two-handed.