MAQcenter Celebrates a day of open doors of the 2 to 4 July
27 June 2013
![Imagen](https://img.interempresas.net/fotos/858594.jpeg)
Will have the following models of machine.
Section lathes
- Okuma – LB3000EX MC500 (
see index card ) - Okuma– Multus B300IIW (
see index card ) - Okuma– Genos L300M (
see index card ) - Nexturn – SA20And
The model SA20And of the range of lathes of cabezal mobile (Swiss-type) of Nexturn fed by a loaders of bars LNS is the most effective solution and cost-efficient for the bar-cutting of precision.
Section machining centres
- Okuma – MB5000H (
see index card ) - Okuma– MU500GOES (
see index card ) - Okuma– Genos M560V-R (
see index card )
Section pressesetings
Of the hand of Elbo Controlli will be able to appreciate the importance and the simplicity with which achieves the maximum precision in presetting. For this the signature will show two equipment and skilled personnel to advise on the capacities of these systems of Italian precision. They can consult the characteristics of the models that present for this occasion in the following links:
- Elbo Controlli – Sethy (
see index card ) - Elbo Controlli– Khyan (
see index card )
Section software
Likewise, in his IT Corner will analyse analyse the solutions advanced in software of Okuma and of MAQcenter. For this will have the presentations of 3D Virtual Monitor of Okuma that will allow to know in advance if the machine is prepared to mechanise the piece wished of safe form, fast and precise.
Also will have the demonstration in IGF PC that will allow to check with that ease the user can establish the geometries of the piece with simple parameters. And with MAQonline to check that the best direct attention and customised in the machine is possible with a simple connection to internet.
On the other hand, will present the solutions of Digital Way for the monitoring of installed tools in the machine with the greater reliability and sensitivity. With Watt Pilot will be able to optimise the life of the tool and reduce the costs of production, in addition to avoiding possible breaks of tool, of damage of the piece or in the worst of the cases damage of the machine by collision or sobreesfuerzo.
Presentations
Maqcenter will have the collaboration of Hexagon Metralogy presenting PC-Dmis, easy software to use for the compilation, evaluation, gestión and presentation of the data of manufacture. Besides the probe with Technology Thermo-Lock that warns the transmission of heat of the husillo of machine to the probe of measurement and that deletes the uncontrolled expansion of the carry-tools and of the body of probe. The probe Thermo-Lock supplies resulted of consistent and precise measurement, even in spite of big differences of temperature.
And his collaborators of Tecnocim will show the big potential of the CAD/CAM Top Solid applied to the mechanised in 5-axles. They will realise practical demonstrations in the MU500GOES of Okuma instrumented besides with a probe Renishaw that with his software of Autotuning achieves the best answer to achieve the point zero.
Will be able to know these novelties the visitors that assist to his installations of the 2 to 4 July 10:00h to 18:00h.