This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Corte de tubos también en formato XXL

For thick and thin tubes and profiles

Cutting of tubes also in format XXL

Editorial Interempresas23/11/2012

TruLaser Tube 7000 of Trumpf is a machine of cut by laser prepared for extraordinary measures. It allows to cut tubes and profiles of big diameter and thickness of wall without losing productivity, opening new fields of application up to now inexplorados, like the cut by laser of tubes of 6 metres of long, a diameter until 200 millimetres and a weight until 150 kilos Optionally also is possible to cut tubes with diameters of until 250 millimetres and 225 kilos of weight. For this model neither are a problem the walls with a thickness of 8 millimetres.

All this is possible thanks to the laser CO₂ TruFlow that has a power until 3,6 kW and to the strong accionamiento motriz able to bear the big weights of the tubes. Also the modern unit of control of the machine helps to mechanise the tubes of big dimensions with a high productivity. Of course, the TruLaser Tube 7000 also is apt for thicknesses and diameters smaller.

TruLaser Tube 7000 is prepared for all type of works: for thick and thin tubes, small and big.

From the ergonomic place of work the operario will not lose of sight the process.

Clean cuttings and intelligent designs

The laser is able to cut without efforts outlines of big complexity without touching the tube. Besides, the quality inmejorable of the singings of cut does that in the majority of the cases was unnecessary to retouch the a posteriori piece. If it bets by an intelligent cut, the laser will offer him possibilities until unknown hour, for example when cutting elbows and splice. To facilitate the setting of the pieces can employ auxiliary devices of positioning, such as lengüetas or acanaladuras.

Besides, with help of codes will avoid any failure in the setting.

The technician of subjection of high precision makes possible a mechanised perfect.

Apt also to work innovative designs of tubes.

Fewer costs, more productivity

In comparison with the methods of conventional work, such as saw, taladrar and mill, with the TruLaser Tube you will increase significantly his productivity. A program of pieces coordinates all adjust them of the machine without need that it take part the operario. For tubes of until 200 millimetres of diameter can use the same mordaza of subjection. The staggered rollers that sustain the tubes and guide them lateralmente, adjust of automatic form to the distinct diameters. Until the big tank of elimination of waste of cutting empty by himself alone. With the function FokusLine the position of the focus adjusts automatically to the type of material and to the thickness of the same. Taking into account the tube that wants to mechanise , the software of the machine will activate the parameters necessary laser. The pieces finished can evacuate to in front and optionally also to backwards.

A table of brushes collects the pieces that evacuate by in front and serves at the same time like tope, easily accessible for the pieces.

Automatizable With the LoadMaster Tube

The TruLaser Tube 7000 can automate with the LoadMaster Tube. The tank of tubes has a capacity of until 4 t of gross material that the LoadMaster Tube drives to the mechanised, after realising a proof of feasibility. The software of the machine compares the geometry of the tubes that go to mechanise with data previously entered and avoids of this form that produce failures in case that they have entered wrong tubes. Besides the mordazas of the LoadMaster Tube adjust automatically to the long of the tubes. Of course the tubes can follow loading of manual form.

By his part, the special profiles can enter without problems with help of the device of transport giratorio.

The LoadMaster Tube adapts automatically to the distinct geometries of the tubes.

Design of tubes now in three dimensions

Thanks to the new version of TruTops Tube, design complex tubular constructions is much easier and precise and his manufacture is much safer. Now it is possible to place a three-dimensional tube beside another, in place to design and program each tube separately. This allows to save long, since parameters such as the long, the width, the high, the thickness of wall and the distances of the acanaladuras can adapt without any difficulty to generate different variants. Besides, the tubes can cut in angle all together without problems.