Sandvik Coromant Ibérica, S.A. - Greasing and lubrication equipment
CoroTurn H
System of refrigerante with high pressesure: it improves the control of shavings and prolongs the life of the tools
A better control of the shavings and a longer life of the tools are two key advantages of the system of refrigerante with high pressesure CoroTurn HP of Sandvik Coromant. This system is an only combination of the designs Coromant Attract and CoroTurn HP (high pressesure), that takes advantage of the possibilities of the mechanised offered by the refrigerantes of high pressesure, that give place to a greater productivity or to an increase of until 50% of the life of the tools in some materials.
The attachment Coromant Attract pipes the refrigerante by the turret milling machines or the axis and places it with precision in the point that more needs it (is not possible if they use tool holders with mango). This new system can use in any machine instrumented with refrigerante of high pressesure and attachment Attract, included the machines Multi-Task, vertical lathes (VTL) and lathing centres.
CoroTurn HP Penetrates the zone affected by the heat through a chorro of refrigerante of high pressesure supplied through small filters to cool the plaquita with greater rapidity and efficiency, and achieve an optimum control of the shavings. The chorro creates one coins hydraulics between the upper surface of the plaquita and the inferior part of the shaving that is extracting of the piece or the material, helping like this to reduce the wear of the plaquita and the split of the shaving in pieces smaller for a faster evacuation. The filters, mounted near of the edge of cut, help to increase the speed of the chorro of the refrigerante to pressesures lower and keeps the plaquita totally accessible for an easy change.
In desbaste, since the control of shavings does not be used to to be a problem, the precise application of the refrigerante reduces the temperature of cutting and even increases the life of the tools or the speed of cut in all the materials.
The operations of finishing always present more problems in the control of shavings because of his small depth of cutting and speed of advance. The production automated, well was manufacture of big series or using machines Multi-Task and vertical lathes with automatic change of tools, can not allow the atasco of shavings around the tool, since this would cause costly unemployed of the machine. This only system, Coromant Attract and CoroTurn HP provides a total control of the shavings and, therefore, hygiene for the production without supervision.
The global result is a greater productivity with the use of greater data of cut, for example, until 50% more than speed of cut with a better superficial finishing and the same number of material / pieces mechanised.
The attachment Coromant Attract pipes the refrigerante by the turret milling machines or the axis and places it with precision in the point that more needs it (is not possible if they use tool holders with mango). This new system can use in any machine instrumented with refrigerante of high pressesure and attachment Attract, included the machines Multi-Task, vertical lathes (VTL) and lathing centres.
CoroTurn HP Penetrates the zone affected by the heat through a chorro of refrigerante of high pressesure supplied through small filters to cool the plaquita with greater rapidity and efficiency, and achieve an optimum control of the shavings. The chorro creates one coins hydraulics between the upper surface of the plaquita and the inferior part of the shaving that is extracting of the piece or the material, helping like this to reduce the wear of the plaquita and the split of the shaving in pieces smaller for a faster evacuation. The filters, mounted near of the edge of cut, help to increase the speed of the chorro of the refrigerante to pressesures lower and keeps the plaquita totally accessible for an easy change.
In desbaste, since the control of shavings does not be used to to be a problem, the precise application of the refrigerante reduces the temperature of cutting and even increases the life of the tools or the speed of cut in all the materials.
The operations of finishing always present more problems in the control of shavings because of his small depth of cutting and speed of advance. The production automated, well was manufacture of big series or using machines Multi-Task and vertical lathes with automatic change of tools, can not allow the atasco of shavings around the tool, since this would cause costly unemployed of the machine. This only system, Coromant Attract and CoroTurn HP provides a total control of the shavings and, therefore, hygiene for the production without supervision.
The global result is a greater productivity with the use of greater data of cut, for example, until 50% more than speed of cut with a better superficial finishing and the same number of material / pieces mechanised.
