Sandvik Coromant Ibérica, S.A. - Machine-tooling tools

In the manufacture of pieces of big volume with advance of bar, the manufacturers always are looking for solutions that offer an elder aprovechamiento of the material, to control his global costs, and that bear a greater capacity of advance of bar. Guarantee the hygiene of the process through a consistent useful life and predictable is very important for the production of pieces of big quality, especially in the operations of tronzado. 

Sandvik Coromant Enters a range of solutions that covers lick SL and of tronzado, adapters, mangos, tools of bar-cutting and a generation of plaquitas of tronzado that can fulfil these requirements. CoroCut QD Bases in and reinforces the ranges of effectiveness checked Q-Cut and CoroCut; the result is an enlargement of the offer of options for these processes with a range of flexible tools, easy to use and easy to select.

The focus of the development of this concept have been key appearances like innovative materials of tool and a design of tool that offer a greater stability of the process. The fixation of the tool achieves through an intelligent and simple mechanism of easy subjection to use. The seat of the tip of the tool is bent 20 degrees and incorporates a tope back to resist greater strengths of cutting. Likewise, the adapter of the plaquita has of a seat of rail that increases the stability of the plaquitas of 2 millimetres of width.

In the development of CoroCut QD, has loaned special attention to the creation of new and up to date geometries of tronzado. To the tronzar a component, is very important to minimise the strengths of cutting and guarantee an efficient start of the material. The plaquita has to be the narrowest possible and have of a geometry that generate a narrower shaving that the slot, to provide like this an operation of tronzado with a good control of shaving and a good superficial finishing. Inside the concept CoroCut QD there is available plaquitas with five geometries of tronzado and a geometry of turning, as well as options for the rectified personalised or Tailor Made (to measure) for a wide range of types of material. The coating of PVD of the plaquita offers a better adherencia, qualities of the edge optimised and a greater tolerance ER.