Sandvik Coromant Ibérica, S.A. - Turning inserts

The qualities GC1125 and GC1515 allow to realise a mechanised reliable with edges of cutting that guarantee the operative homogeneity and the quality of the components along prolonged periods.

Sandvik Coromant Adds two models of qualities of plaquitas acute and resistant: GC1125, for operations in stainless steels and GC1515, for steels. Based in the most recent technological advances in the areas of hard metal and the coatings, these plaquitas result ideals for applications that demand an edge of acute cut together with a high resistance of the edge for light turning.

The new qualities are perfect for blur short, mechanised of small pieces or for the cases in that it needs a high tenacity of the edge. His typical applications are the intermittent cuttings, mechanised in square and inner finishing.

The quality GC1125 offers a high sharpness of the edge for mechanised sure and without rebabas of stainless steels, to the time that presents the necessary resistance for intermittent cuttings. Likewise, it contributes an excellent performance in pasty materials and is an optimum election to avoid vibrations in the mechanised. Thanks to the greater resistance and sharpness of the edge, keeps a good control of shavings, superficial finishing and length of the tool to low speeds of advance.

The quality GC1515 for mechanised of steel takes advantage of to the maximum his exclusive combination of resistant coating to the wear with an edge tenaz and sure. This allows him be able to produce more components by edge of cut, to the time that keeps some narrow tolerances with a minimum of corrections by unfit.

The qualities GC1125 and GC1515 provide a mechanised reliable and more predictable, with edges of cutting that guarantee the operative homogeneity and the quality of the components along prolonged periods. These properties make possible a mechanised without problems and the reduction of the cost of production by piece.