The Italian company G.P.To., represented by Carboneras International, S.L., it manufactures a wide range of pneumatics feeders.
These feeders characterise by his efficiency, his precision, his reliability and his easy setting and maintenance. His wide range of models allows to cover material of diverse widths (until 1.500 mm); diverse thicknesses (until 6 mm) and high speeds of feeding (until 150 g/m.).
The pneumatics feeders G.P.To. They fulfil totally the technical requirements indicated by the valid European directives, especially the ones of the Directive of Machines and the ones of the Managerial EMC, by what are autocertificados CE.
The main advantages of the pneumatics feeders G.P.To sound the following:
to) they adapt to diverse types of materials: flejes, bands, bars, cables, tubes, profiles of aluminium, plastic, wood, fabric, paper, etc.
b) are easy to mount and adapt to any machine (eccentric presses, hydraulics or pneumatics, taladros, sawing machines, etc.).
c) Speed of work elevated: the high strength of tighten of the mordazas (fixed and mobile), the high capacity of the valves, the precision of the synchronism and the diverse possibilities of amortiguación do that the speed of work reach the 30 m/min.
d) precision: using the feeder properly, the material advances with a precision of ±0,05 mm.
The equipment of series of the pneumatics feeders G.P.To. It is composed by a pneumatics diagram or electroneumático of operation, in function of the application:
- short step: the presses commands to the feeder, (applies when the speed of the feeder is equal or greater that the one of the presses).
- Long step: the feeder commands to the presses, (applies when the speed of the feeder is inferior to the one of the presses).
- Multiple steps: the feeder realizar a determinate sequence of advances and later gives him an electrical signal to the presses.