Sandvik Coromant Ibérica, S.A. - Solid end mills
Sandvik Coromant Coromill Plura
Milling cutters of ranurar: soldered of PCD
The range of milling cutters of ranurar soldered of PCD CoroMill Plura are of big interest for all those manufacturers that realizar operations of recanteado, milling of surfaces, cajeado and mechanised in components of CFRP (plastic reinforced of fibre of carbon).
This tool presents some patterns of durable and predictable wear, essential to reduce the time of inactivity of the machine and avoid any operation of remecanizado or components refused in the mechanised of pieces of CFRP. The secret after these milling cutters of ranurar is the quality of high performance of PCD (polycrystalline diamond) optimised for materials of CFRP. These milling cutters, in addition to having a quality developed by Sandvik Coromant to provide the maximum useful life of possible tool, also can reacondicionarse.
To guarantee the best result of mechanised, Sandvik Coromant recommends that the extreme of the strawberry keep 1 mm underneath of the material of composites, at the same time that it is preferable to apply a strategy of milling conventional (in comparison) because it involves fewer vibrations. Regarding the maximum thickness of the material, is recommended that was 2 mm inferior to the length of the section of PCD of the tip of the tool. An application of mechanised of surfaces 2D allows speeds of cut around 200-400 m/min, together with speeds of advance of 0,03-0,06 mm/rev for desbaste and 0,02-0,04 mm/rev for finishing. Available in a range of diameters of 6 to 16 mm, the milling cutters also offer the possibility of inner supply of refrigerante and the capacity of mechanised in ramp of 5°.
This tool presents some patterns of durable and predictable wear, essential to reduce the time of inactivity of the machine and avoid any operation of remecanizado or components refused in the mechanised of pieces of CFRP. The secret after these milling cutters of ranurar is the quality of high performance of PCD (polycrystalline diamond) optimised for materials of CFRP. These milling cutters, in addition to having a quality developed by Sandvik Coromant to provide the maximum useful life of possible tool, also can reacondicionarse.
To guarantee the best result of mechanised, Sandvik Coromant recommends that the extreme of the strawberry keep 1 mm underneath of the material of composites, at the same time that it is preferable to apply a strategy of milling conventional (in comparison) because it involves fewer vibrations. Regarding the maximum thickness of the material, is recommended that was 2 mm inferior to the length of the section of PCD of the tip of the tool. An application of mechanised of surfaces 2D allows speeds of cut around 200-400 m/min, together with speeds of advance of 0,03-0,06 mm/rev for desbaste and 0,02-0,04 mm/rev for finishing. Available in a range of diameters of 6 to 16 mm, the milling cutters also offer the possibility of inner supply of refrigerante and the capacity of mechanised in ramp of 5°.
