Walter Tools Ibérica, S.A.U. - Carbide end mills
Prototyp Protostar Ti 40
Milling cutters of hard metal: for desbaste and finishing
The strawberry Protostar You 40 of Prototyp, commercialised by Walter Tools Iberian, S.To.Or., it is of high performance of hard metal with different radio of corner. The radius is from R=0,2 until 4 mm. The range of diameters goes from d1=12 until 25 mm. It has internal refrigeration and the angle of the propeller is of 40 degrees. It incorporates 4 unevenly situated slots, neck reduced and coating ACN. It has of handle according to DIN 6535 HAS with superficial treatment.
It applies for the mechanised economic of materials of titanium and for the finishing and desbaste with an alone tool: the mechanised HPC, milling of outlines with length of complete cutting and finishing with high speeds of cut to attain the best possible quality of the surfaces.
With his depth of maximum cutting obtains a maximum volume of start. The evacuation of the shavings is safe thanks to the axial refrigeration intern. It has double speed of cut in tasks of desbaste and finishing in comparison with the conventional tools. It achieves a better quality of the surfaces in the finishing. The spaces of uneven slot allow a milling silent and a mechanised without vibrations.
It has of slots pulidas without edges of contribution and for the hygiene in the evacuation of shavings. It obtains a better superficial quality by means of the microgeometría and to the pretratamiento and postratamiento of the edges of cutting. Thanks to the coating ACN with postratamiento achieves a greater length of the tool. It offers maximum hygiene in the processes with the special treatment of the handle, that increases the pair and the transmission of strengths in the device of subjection of the tool.
It applies for the mechanised economic of materials of titanium and for the finishing and desbaste with an alone tool: the mechanised HPC, milling of outlines with length of complete cutting and finishing with high speeds of cut to attain the best possible quality of the surfaces.
With his depth of maximum cutting obtains a maximum volume of start. The evacuation of the shavings is safe thanks to the axial refrigeration intern. It has double speed of cut in tasks of desbaste and finishing in comparison with the conventional tools. It achieves a better quality of the surfaces in the finishing. The spaces of uneven slot allow a milling silent and a mechanised without vibrations.
It has of slots pulidas without edges of contribution and for the hygiene in the evacuation of shavings. It obtains a better superficial quality by means of the microgeometría and to the pretratamiento and postratamiento of the edges of cutting. Thanks to the coating ACN with postratamiento achieves a greater length of the tool. It offers maximum hygiene in the processes with the special treatment of the handle, that increases the pair and the transmission of strengths in the device of subjection of the tool.
