Geka Maquinaria, S.L.U. - Ironworkers (punch)

These cutting cutting shears punch presseses have 5 places of work instrumented, controlled by 2 hydraulics cylinders, with possibility of accionamiento simultaneous or independent. Geka Has conceived basing in the portacuchillas radial, a system patented of floating upper blade that follows a rectilinear movement in all his course, cutting angular without deformation neither loss of material, surpassing like this the problem of deformation that generates the conventional radial system. The big stability of the portacuchillas monobloque, controlled in his two extremes, allows the setting of a long upper blade, of geometry studied for an optimum quality of cutting. The radial system, allows by means of his effect multiplicador of strength, give big capacities of cut of optimum quality. The machines Hydracrop of Geka go instrumented in his standard version with blades for round and square. Besides this place has been designed taking into account the cut of special profiles as Or, I, Z, for what has of a wide estoc of blades.

Between the characteristics of the model 55/100 fits to stand out the cut of llanta of 300 x 15 or 200 x 20; the cut of angle with standard blade (without deformation) that it is of 120 x 120 x 10; the cut of angle with optional blade (small deformation) that it is of 130 x 130 x 13; and the cut of diameter or squared of 40 mm; in addition to a capacity of punzonado with diameter of 40 x 10 mm.