Egasca, S.A. in the EMO 2007
Miyano Machinery Inc.
-BX-26S: Center of turning two identical headers, with cars type tool Combs.
-BNJ-51SY2: with this new model of the BNJ series, the passage of bar of the main spindle is increased to 51 mm, there is a greater tour on the bandwagon of the shaft and in the main turret and increases the number of stations motorcades to 12. In addition, joins a Fanuc control 32i-A software monitoring tools.
-ABX-42THB: in addition to the news of the latest generation of the lathes of the ABX-TH series, this model full range by incorporating a third turret with axis B (turn 360 degrees).
-MTV-T331W: new machining center with simultaneous 5-axis control, especially suitable for the machining of small pieces of great accuracy and complexity.
Yeong Chin Machinery (YCM)
-NSV102A: Centre of vertical machining with 1120 x 650 mm table and engine of the head with a top speed of 12,000 rpm.
-NSV66A: Centre of vertical machining with 840 x 560 mm table and engine of the head with a top speed of 12,000 rpm.
-NDV85A: Centre of vertical machining of high-speed motor of the head with a top speed of 20,000 rpm and a control with the necessary options for the optimum machining of moulds: AI Nano HPCC, HRM, Nurbs, Risc, Data ServerThermal compensation of spindle, etc.
-H630M: Centre horizontal machining with 2 pallets of 630 x 630 mm, spindle up 12,000 rpm and warehouse for 40 tools with cone BBT50.
-FX350A: 5-axis with "Heidenheim iTNC-530." control vertical machining center
XV1020A: center vertical machining with engine integrated with a top speed of 10,000 rpm, cooling the inside of the spindle, pump cooling of high pressure, interface for the fourth axis and chip extractor.
-NT200SY: Centre of turning two heads and turret with displacement on the chariot of the axis, and.
-GT300MA: Centre of turning with dish of 10 "and turret with 12 motorized stations.