Mazak (Intermaher) at the EMO 2007
QTN-150 II MSYT
It's a new development of the current center of turning QTN-150 II. The main novelty of the lathe is that her has incorporated a second turret. It is a center of turning with motorized tool, two heads of 6 "and axis and.
VT Nexus-3000
NCV 510C-II - 5 X
It's an evolution of the current VCN510C-II vertical machining center. In this case the table has been replaced and incorporated a tilt table of two axes for 5-axis machining.
NCV 655D-II
HCN8800-II
Tours of X 1400, Y1200, Z1325
It has a dash of two pallets of series.
Pallet size is 800 x 800 mm.
The maximum size of piece is 1450 mm.x 1450 mm. in diameter height.
Maximum admissible piece on the pallet size: 2,200 kg.
Type CNC: Mazatrol Matrix Nexus
You can incorporate a head interaction of 10,000 rpm., 37 kw and 586 Nm or a head interaction of 8,000 rpm., 37 kw and 1218 Nm. Optional can be also a head of 16,000 rpm.
Positions in fast: 60 m/min.
Store random 48 tools.
Pallet change time: 13 seconds.
Integrex IV ST (2500)
It is a new center of turning that it expands the current range of Integrex 300 4th ST. In this case a model has been developed with 2500 mm between points. The most that had so far was 1500 mm between points.
Variaxis 630 - 5 X II T
He is a new development on the current 630 Variaxis - 5 X II. In this case has added the option of turning with a C axis with integrated engine up to 1,100 rpm. allowing you to perform operations of turning as well as 5-axis machining.
Integrex e - 420 H - ST II
It's a new centre of torneado-fresado based on the Integrex e - 410 H-S II that incorporates a turret at the bottom of the machine with axis and and possibility of motorized tool. It has two heads of turning and a head of milling.
Integrex e-1060V/8 II RAM
Is trafficking in a new centre of torneado-fresado based on the Integrex e-1060V/8 II that he has joined a column next to the current head which allows torneados of long pieces, as well as milled with motorized tool of 3,000 rpm and 5.5 kw. It has a storage of 40 tools own and independent of the main cone Capto C6 head store. The RAM has a distance of 900 mm.
CyberTech Turn 5500 MT:
New model of lathe of high-performance next to complement the range of the current Cybertech Turn 4500. It's a lathe especially designed for the machining of large axes. The increased current demand for these lathes is located in the oil sector. This model is as an option the possibility of placing a barrón turned interior of diameter 100 mm and 1000 mm in length.