This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Universal CNC en la EMO 2007

Ver más artículos sobre: Spain ranks sixth among countries participating in the EMO

Universal CNC in EMO 2007

26/11/2007

Universal CNC represents in Spain Takizawa, Makino, Fuji and Enshu Japanese manufacturers and the Taiwanese Victor and Akira Seiki. All manufacturers exhibit news in its own stand.

Takizawa

It exposes new, TT-350CMG, a front vise of 2 spindles, 2 motorized turrets with automatic loading/unloading. The machine is capable of fully machined parts of 280 mm in diameter and length 160 mm automatically loaded. A TNR-200YSG, lathe spindle, subhusillo and axis will also be exposed "And" and roboticized, TMM - 250 M 3, lathe multi-tasking with 2 opposing spindles, head fresador in the upper part and turret at the bottom and a TMM-200, winches with 2 opposing spindles2 motorized turrets that can work interchangeably in both spindles and the upper turret has axis "And".

MAKINO

In the section of production machines Makino exposes as the center of machined horizontal a92 (pallett 800 x 1000 mm), the a81 5XR, horizontal center of 630 of pallet and 5 axes, G5, a grinding machine for Aeronautics, the a61 5XR, pallet horizontal centre 500 and 5 axes and the J3, pallet horizontal Centre 400 and automatic loading/unloading. In the section of moulds and dies, will be displayed to the EDAC1, by electrode wire EDM machine, the SP64 and the W32FB, machines by wire EDM, V22-5XB, vertical 5-axis, the V33i, vertical center and the E33, special graphite vertical center.

Fuji

It exposes a robotic cell consisting of a dual-head lathe and drilling Centre (ANW-35T + HM-35T). Part of this application, Fuji also exposes a lathe for 2 front spindles robotic model PMD-20T.

Enshu

Enshu exposes 3 horizontal centers, of which 2 are new, the JE-100 with BT-50 and 630 or 800 mm pallets and JE - 60 G with BT-40, 500 mm pallet and quick to 90 m/min. Also exposed the JE-80S, a horizontal center of pallet 500 mm with a capacity for machining a bucket of 800 mm, cone BT-40, quick to 90 m/min.

Victor

Victor exposes 6 machines, horizontal Centre H-500, center vertical VCII - 550 L, torno vertical V300 and 3 horizontal lathes, Nvturn-2600CV, VTurn-40/220 and VTurn-46CV.

Akira Seiki

Akira Seiki exhibited two centres of vertical machining, the SV1050 (1050x535x560mm) and SR3XP (762x410x460mm) and a center of drilling, threading of 5ejes (x:320, and: 160, z:280, B:±120 °, c:360 °).