Walter Tools at the EMO 2007

With the new F4080, Walter has incorporated an octagonal Strawberry with its offer to Xtratec. The new tool with octagonal cutting edges and an angle of 43 degrees kappa available with passage of width tooth and a half. There is only a geometry of plate cutting for all diameters (40 mm to 160 mm). As the other Xtratec tools, the octagonal Strawberry is tailored to individual requirements. Are available court for cast iron, steel and aluminium materials, including new materials developing countries of the Insert TigerTec WSP45 and WSM35 for high conditions of court that help prevent plastic deformation and wear. Plates of court is available in five geometries of rompevirutas from "hard" (for unfavourable Court) and sharp (for aluminum materials). Optionally, you can work with versions of sintered or rectified high precision plate. A special feature is the body of the tool that is built in a balanced way to reduce the impact on the spindle of the basic machine machining of aluminium at high speed. F4080 is suitable for all kinds of machining, as planned, milling circular, drilling, etc.

The strawberry flat Xtratec F4033 has eight useful edges with an angle of kappa = 45 ° to clearly reduce the costs of the cutting edges.

This comprehensive program of reversible plates offers users even more advantages in regards the costs: the new grades of court PVD Tigertec (classes WSP45 and WSM35) now allow a more economical machining of high-alloy stainless steels, as well as materials with a burst of chips more difficult to machine with a nickel base alloys or titanium alloys. All reversible plates are available with three geometries (robust, universal and soft cut), with radio or facet. In a manner complementary to the kinds of court WKP material available to date for steel and cast iron, have been considerably expanded the possibilities of use.

And another advantage: WALTER has placed special emphasis on the integration of systems to develop the strawberries of plan Xtratec. The reversible plates of the strawberry F4033 also fit into the bodies of most similar types tool F4047 (kappa 75 °) and F4048 (kappa 88 °).

Equipped with reversible plates of form trigona, the high performance F2330 Strawberry is capable of performing any kind of machining. In addition to the standard operations of a strawberry of plan it is precisely the most difficult types of machining as the milling circular perforation, penetration, etc. which are among the specialities of this tool. No matter the type of application, the strawberry F2330 complies with what its name promises.

Both the users of the sector of construction of machines such as the moldistas or specialists for the machining of vane compressors appreciate precisely these characteristics. The reversible plates with three edges have a positive basic form to provide a cut smooth and practically absent from vibrations. For adaptation to the case of application in particular, you can choose between three-edged geometries: universal, robust, smooth cutting. The available tool bodies with a range of diameters from 20 - 85 mm have a few channels of generous dimensions swarf to avoid that the chip is stuck in the alveoli.

In addition to the materials of court Tigertec WKP25 and WKP35, WALTER supplies now also reversible plates for the F2330 of the new PVD Tigertec WSP45 and WSM35 classes. These materials have been developed especially for the machining of stainless steel or with a hard boot of chips such as titanium alloys. The employability of the high-performance tool is enlarged greatly. At the same time improve the performance of court and extends the service life even in the case of problematic applications.

The strawberry of escuadrar Xtratec F4042 is available with diameters of 10 mm to 160 mm and the form of insert AD… in different sizes. Simply, it's the most versatile talent of its kind. The extension of the programme of court materials allow maximum performance for all materials and machining chip startup. In addition to the accredited universal classes Tigertec WKP25-35 are also available the new materials of court PVD Tigertec WSP45 and WSM35, which have been developed especially for the machining of high-alloy stainless steels, as well as materials with a difficult chip startup such as titanium alloys. Also new are the reversible plates for the machining of aluminum materials for classes WXN15 (coated); WK10 (uncoated).

The wide range of radii 0.2 mm to 6 mm corner answers to virtually any need of machining (e.g. milling Copier, preparation of alveoli). Geometry variants range from "robust" (unfavourable) even "sharpening" (aluminium). For maximum accuracy requirements are available types of plates with a rectified perimeter. Everything is possible: inclined penetration, circular milling of drilling, etc. In this way, the tool meets the requirements of all the circles of users: construction of machines in general, construction of vehicles, typical machining of stainless steels (chemical and foodstuff,...), industry Aeronautics (titanium), etc.