Precision air chuck Ø240mm (Type 9-500-6QC) Technology: APC Repeatability approx. 0.0015 Jaw stroke 12mm concentricity: approx. 0.005 mm
base jaw DRM 134-182mm
- as new unused air chuck Equipment: - Jaw Ø 174 - 182mm
Use of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.
País:
Suiza
Estado:
Segunda mano
Actualizado:
01/12/2022 21:00:03
Referencia cliente:
42974
+41‑719487068
Introduzca aquí sus datos para contactar con el anunciante
Placas y bloques de sujeción | Segunda mano Workpiece Fixtures MICRO CENTRIC 9-500-6-QC usado en venta
Venta de placas y bloques de sujeción de segunda mano, placas y bloques de sujeción nuev@s y de ocasión, de las principales marcas (Micro centric, Stoller, etc.). Encuentre su oferta y contacte con el vendedor.
CARACTERÍSTICAS · Dimensiones 1.500×3.000mm · Espesor 250mm · 5 ranuras de 28mm · Distancia entre ranuras 300mm · Observaciones · Con agujeros de nivelación ... Leer más
Precision air chuck Ø240mm (Type 9-500-6QC) · Technology: APC · Repeatability approx. 0.0015 · Jaw stroke 12mm · concentricity: approx. 0.005 mm · base jaw DRM 134-182mm · - as new unused air chuck · Equipment: · - Jaw Ø 174 - 182mm · Use of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact. ... Leer más
